Handy DG Posted yesterday at 05:47 PM Share Posted yesterday at 05:47 PM @SainT Does the 7800 GD output a different format signal from its RGB port when emulating 2600 games, compared to 7800 games? The reason I ask is because when I connect it to my DVDO Edge video processor using the HD Retrovision Genesis component video cable, I get a blank screen and an "Unsupported Signal" message on the info page for the Edge. However, it works perfectly when emulating 7800 games. Strangely enough, it also works perfectly when connected directly to the component video input on my old 2011 Panasonic Viera plasma display. Thanks! Quote Link to comment Share on other sites More sharing options...
SainT Posted yesterday at 06:01 PM Share Posted yesterday at 06:01 PM Hi! Yes, the 2600 and 7800 modes output a different video signal timing. This is the case with the actual 7800 hardware when using Maria (7800) or TIA (2600), they are completely different chips and the system switches between which controls the video out. The 2600 can have quite variable vsync (it’s actually software defined) so many modern displays have issues with the 2600. 1 Quote Link to comment Share on other sites More sharing options...
Handy DG Posted yesterday at 07:19 PM Author Share Posted yesterday at 07:19 PM Cool, that explains the problem. I had wanted to run the 7800 GD through my video processor for convenience sake, but it still looks very good when connected directly to my display. Thanks again for the info! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.