jaysmith2000 Posted August 11, 2005 Share Posted August 11, 2005 Greetings, From reading through information it seems that the 1450xld's out there do not have actual 1450xld nametags on them, but are blank or tagged with a 1200xl. Mine actually has the original tag on it. Am I misinformed about the nametags for these? Here's a link to my site with a pic of the 1450xld. It's in the collectors corner: Jaysmith2000's Collection Quote Link to comment Share on other sites More sharing options...
video game addict Posted August 11, 2005 Share Posted August 11, 2005 There's a stock photo of one in the Dec 83 Electronic Games magazine, it clearly has 1450xld name tag, although, it could have been a photoshop deal back in the day from a 1200.. if you look really closely you can see the L1 L2 leds above the tag, which are on the 1200xls. Not on your unit though. What's all that gunk around that tag & start button? Is it glue or epoxy from when they applied the tag? The tag looks a little wavy like it was removed once & put back on possibly?? Quote Link to comment Share on other sites More sharing options...
jaysmith2000 Posted August 11, 2005 Author Share Posted August 11, 2005 There's a stock photo of one in the Dec 83 Electronic Games magazine, it clearly has 1450xld name tag, although, it could have been a photoshop deal back in the day from a 1200.. if you look really closely you can see the L1 L2 leds above the tag, which are on the 1200xls. Not on your unit though. What's all that gunk around that tag & start button? Is it glue or epoxy from when they applied the tag? The tag looks a little wavy like it was removed once & put back on possibly?? 909159[/snapback] It is glue. It looks like it was pulled off at one time (or was falling off) and so Hans glued it back down and made a bit of a mess. Those darn programmers! Thanks for the info! Quote Link to comment Share on other sites More sharing options...
Curt Vendel Posted August 11, 2005 Share Posted August 11, 2005 Jayson, Your unit is most likely one of the CES display units or magazine photo units. Your disk drive is a 1050 mech and not the Epson mech which was used in the functional 1450XLD's that had working disk controllers... Very few 1450XLD's had name tags, I have 2 without, and the full Tong unit with working drives has a 1450XLD (or is it 1450XL) name tag... I'll have to check... Did you know the Atarti 1400XL was actually called the Atari 1201XL? Or that the 1450XLD was going to be called the 1250XLD Curt There's a stock photo of one in the Dec 83 Electronic Games magazine, it clearly has 1450xld name tag, although, it could have been a photoshop deal back in the day from a 1200.. if you look really closely you can see the L1 L2 leds above the tag, which are on the 1200xls. Not on your unit though. What's all that gunk around that tag & start button? Is it glue or epoxy from when they applied the tag? The tag looks a little wavy like it was removed once & put back on possibly?? 909159[/snapback] It is glue. It looks like it was pulled off at one time (or was falling off) and so Hans glued it back down and made a bit of a mess. Those darn programmers! Thanks for the info! 909194[/snapback] Quote Link to comment Share on other sites More sharing options...
jaysmith2000 Posted August 11, 2005 Author Share Posted August 11, 2005 Hey Curt! Does this mean my system's drive won't work? I've got the specs on the power supply but as of yet have not found one to use. Don't want to use a standard 1200xl power supply, but maybe that would be fine? I had no idea it was a 1201 and 1250xld. Interesting. Thanks for the info! Jason Jayson, Your unit is most likely one of the CES display units or magazine photo units. Your disk drive is a 1050 mech and not the Epson mech which was used in the functional 1450XLD's that had working disk controllers... Very few 1450XLD's had name tags, I have 2 without, and the full Tong unit with working drives has a 1450XLD (or is it 1450XL) name tag... I'll have to check... Did you know the Atarti 1400XL was actually called the Atari 1201XL? Or that the 1450XLD was going to be called the 1250XLD Curt There's a stock photo of one in the Dec 83 Electronic Games magazine, it clearly has 1450xld name tag, although, it could have been a photoshop deal back in the day from a 1200.. if you look really closely you can see the L1 L2 leds above the tag, which are on the 1200xls. Not on your unit though. What's all that gunk around that tag & start button? Is it glue or epoxy from when they applied the tag? The tag looks a little wavy like it was removed once & put back on possibly?? 909159[/snapback] It is glue. It looks like it was pulled off at one time (or was falling off) and so Hans glued it back down and made a bit of a mess. Those darn programmers! Thanks for the info! 909194[/snapback] 909208[/snapback] Quote Link to comment Share on other sites More sharing options...
Curt Vendel Posted August 11, 2005 Share Posted August 11, 2005 DON'T use a standard XL/XE power supply, the first thing you'll do is blow out the video circuits on a 1400XL or 1450XLD... You can take an off the shelf PC power supply, wire up an 8 pin DIN plug and use that to power your XLD... I doubt your systems disk drive works, but hey, you never know.... quick way to check is to use a flashback, look through the back vents and see if you can see a small daughterboard card plugged ontop of the motherboard inside and a cable going from it to the disk drive -or- on the off chance you may have a TONG motherboard, you'll see the cable plugged right into the motherboard itself. Otherwise you'll have to open the case and have a look inside, this way is the quicker and easier route. Curt Hey Curt! Does this mean my system's drive won't work? I've got the specs on the power supply but as of yet have not found one to use. Don't want to use a standard 1200xl power supply, but maybe that would be fine? I had no idea it was a 1201 and 1250xld. Interesting. Thanks for the info! Jason Jayson, Your unit is most likely one of the CES display units or magazine photo units. Your disk drive is a 1050 mech and not the Epson mech which was used in the functional 1450XLD's that had working disk controllers... Very few 1450XLD's had name tags, I have 2 without, and the full Tong unit with working drives has a 1450XLD (or is it 1450XL) name tag... I'll have to check... Did you know the Atarti 1400XL was actually called the Atari 1201XL? Or that the 1450XLD was going to be called the 1250XLD Curt There's a stock photo of one in the Dec 83 Electronic Games magazine, it clearly has 1450xld name tag, although, it could have been a photoshop deal back in the day from a 1200.. if you look really closely you can see the L1 L2 leds above the tag, which are on the 1200xls. Not on your unit though. What's all that gunk around that tag & start button? Is it glue or epoxy from when they applied the tag? The tag looks a little wavy like it was removed once & put back on possibly?? 909159[/snapback] It is glue. It looks like it was pulled off at one time (or was falling off) and so Hans glued it back down and made a bit of a mess. Those darn programmers! Thanks for the info! 909194[/snapback] 909208[/snapback] 909258[/snapback] Quote Link to comment Share on other sites More sharing options...
danwinslow Posted August 11, 2005 Share Posted August 11, 2005 Use a flashback?! Quote Link to comment Share on other sites More sharing options...
mos6507 Posted August 19, 2005 Share Posted August 19, 2005 DON'T use a standard XL/XE power supply, the first thing you'll do is blow out the video circuits on a 1400XL or 1450XLD... That's what I found out the hard way. Quote Link to comment Share on other sites More sharing options...
+kheller2 Posted August 20, 2005 Share Posted August 20, 2005 I think there were different power supplies for the 1400, 1450 and TONG boards. is this right Curt, all three were different? (atleast in construction) Quote Link to comment Share on other sites More sharing options...
tjlazer Posted August 21, 2005 Share Posted August 21, 2005 Just curious where did you get it? I wish I had one for my collection. What would one sell for today I wonder? Quote Link to comment Share on other sites More sharing options...
+kheller2 Posted August 21, 2005 Share Posted August 21, 2005 A working 1400 mobo in a 1400XL case would probably fetch close to $700 I guess. The 1450 mobos themselves would be around $300-$500. Any working 1450XLD is gonna cost you a lot of money anymore. When I collected prototypes, the price would double every few years it seems. And that isn't open market, that is between collectors mind you. Quote Link to comment Share on other sites More sharing options...
jaysmith2000 Posted September 10, 2005 Author Share Posted September 10, 2005 (edited) Jayson, Your unit is most likely one of the CES display units or magazine photo units. Your disk drive is a 1050 mech and not the Epson mech which was used in the functional 1450XLD's that had working disk controllers... Very few 1450XLD's had name tags, I have 2 without, and the full Tong unit with working drives has a 1450XLD (or is it 1450XL) name tag... I'll have to check... Did you know the Atarti 1400XL was actually called the Atari 1201XL? Or that the 1450XLD was going to be called the 1250XLD Curt Hey Curt! I finally had a chance to tear into this and check it. I've attached pictures of the insides. It definitely has a daughter board, but it's a big one! Would this be the first one you've seen with 1050 mechanism that is a functional drive? Would make a nice discovery! The 4th pic is the drive upside down. Edited September 10, 2005 by jaysmith2000 Quote Link to comment Share on other sites More sharing options...
walter_J64bit Posted September 11, 2005 Share Posted September 11, 2005 jaysmith2000 are you lost? Don't you know this isn't the Jag Forum But you got love that 8-bit you have Quote Link to comment Share on other sites More sharing options...
Curt Vendel Posted September 11, 2005 Share Posted September 11, 2005 Hi Jayson, The motherboard is a standard 1450xl type, that daugtherboard is odd, looks like a parallel version of a dual 1050 controller board, versus using the standard disk drives (later use of Epson disk drives) Most likely its either an earlier controller board design or a side-project design where engineers looked to use existing 1050 mech's in the design. Good idea in practice obviously, however, unless the firmware is updated, the question begs to be answered, are the drives 127K's or full 360K drives... Contact me off-line, I'd like you to ship out the unit, and let me power it up and lets get some more answers to this beastie, plus I would like to dump the eproms as well. Curt Jayson, Your unit is most likely one of the CES display units or magazine photo units. Your disk drive is a 1050 mech and not the Epson mech which was used in the functional 1450XLD's that had working disk controllers... Very few 1450XLD's had name tags, I have 2 without, and the full Tong unit with working drives has a 1450XLD (or is it 1450XL) name tag... I'll have to check... Did you know the Atarti 1400XL was actually called the Atari 1201XL? Or that the 1450XLD was going to be called the 1250XLD Curt Hey Curt! I finally had a chance to tear into this and check it. I've attached pictures of the insides. It definitely has a daughter board, but it's a big one! Would this be the first one you've seen with 1050 mechanism that is a functional drive? Would make a nice discovery! The 4th pic is the drive upside down. 928976[/snapback] Quote Link to comment Share on other sites More sharing options...
jaysmith2000 Posted May 22, 2006 Author Share Posted May 22, 2006 Sorry to drum up an old topic, but I thought y'all might be interested in an update: I finally was able to locate a power supply for this beast (thanks Bradley at Best). Powered it up and it is fully functional including the floppy drive. The floppy works better than my other 2 1050's that's for sure. I don't think it has seen a lot of use. Anyways, I'll be testing the speech chip and getting the RPM's and density of the drive soon. Will post future updates here. Quote Link to comment Share on other sites More sharing options...
Bryan Posted May 22, 2006 Share Posted May 22, 2006 Awesome news! Quote Link to comment Share on other sites More sharing options...
+kheller2 Posted January 9, 2007 Share Posted January 9, 2007 Sorry to drum up an old topic, but I thought y'all might be interested in an update: I finally was able to locate a power supply for this beast (thanks Bradley at Best). Powered it up and it is fully functional including the floppy drive. The floppy works better than my other 2 1050's that's for sure. I don't think it has seen a lot of use. Anyways, I'll be testing the speech chip and getting the RPM's and density of the drive soon. Will post future updates here. Any updates? =) Quote Link to comment Share on other sites More sharing options...
+kheller2 Posted September 16, 2011 Share Posted September 16, 2011 Has anyone seen jaysmith2000? It has been a few years and over on the Jag sector he hasn't been around for a while. Quote Link to comment Share on other sites More sharing options...
Defender II Posted November 14, 2014 Share Posted November 14, 2014 I know, old dead topic...just call me a grave digger. Curt, Did you ever find any information, parts list or schematics for this version of the 1450XLD floppy controller board? Quote Link to comment Share on other sites More sharing options...
KLund1 Posted November 14, 2014 Share Posted November 14, 2014 Ditto Curt. Please see my last PM. Is this something that might help? We are getting 1 more step up but too many to go. PM anything to help? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.