liquidcross Posted November 23, 2005 Share Posted November 23, 2005 I've got an SIO2PC adapter (the SIO jack version found on this page, on the left) and I'm wondering if anyone ever made a case or box for it, so I wouldn't have exposed circuitry just lying around. Any suggestions? Quote Link to comment Share on other sites More sharing options...
carmel_andrews Posted November 23, 2005 Share Posted November 23, 2005 Isn't SIO 2 PC just a cable to connect the atari or atari i/o device to a pc paralell printer port or am i missing something Quote Link to comment Share on other sites More sharing options...
Zybex Posted November 23, 2005 Share Posted November 23, 2005 I made my own sio2pc, and i use a telephone box for put it inside. Quote Link to comment Share on other sites More sharing options...
Mindfield Posted November 23, 2005 Share Posted November 23, 2005 I've got the same SIO2PC adapter (got it from Atarimax as well). I've sort of been pondering what I could do to make a case for it myself. I've used it bareback, as it were, so far, but I'd like to see if I can make something to house it in. I think it would almost have to be a custom job, as you'd want something you can bolt the serial and SIO jacks to from the inside, and as well maybe cut some port holes and lay a thin strip of plexiglass underneath so the LEDs can still shine through. Quote Link to comment Share on other sites More sharing options...
Rybags Posted November 24, 2005 Share Posted November 24, 2005 Tupperware type container? I was going to build one into a small food container, but have instead decided to build my #2 interface into the machine. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.