holygrailvideogames.com Posted November 22, 2006 Share Posted November 22, 2006 Is the top pot supposed to be set in the 10 o 'clock position or the 9 o'clock position when rebuilding 5200 controllers? I have seen both settings mentioned but I would like to know which one is best. Quote Link to comment Share on other sites More sharing options...
+remowilliams Posted November 22, 2006 Share Posted November 22, 2006 I use the diagnostic cart to determine pot values and position when rebuilding the 5200 sticks. Quote Link to comment Share on other sites More sharing options...
+-^CrossBow^- Posted November 23, 2006 Share Posted November 23, 2006 In answer to your question..when putting the controller back together the top pot should be in the 9 position and the bottom pot in the 6 position. Only reason to put it in the 10 might be if you angled the stick in the up postion a bit as you put the controller back together. I prefer to have it as dead center as I can when putting them back together. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.