danwinslow Posted January 31, 2009 Share Posted January 31, 2009 Well....one of my falc boards seems dead. When power is applied, the MB fan spins, the keyboard light comes on, but no signal is ever generated out of either the monitor or T.V. port. Floppy light comes on, but never starts accessing. I realize its a long shot, but any advice? Quote Link to comment Share on other sites More sharing options...
+Guitarman Posted January 31, 2009 Share Posted January 31, 2009 Have you had the NVRAM ship replace recently?? Quote Link to comment Share on other sites More sharing options...
danwinslow Posted January 31, 2009 Author Share Posted January 31, 2009 No.... Quote Link to comment Share on other sites More sharing options...
+Guitarman Posted February 2, 2009 Share Posted February 2, 2009 Really should check my spelling!!! The NVRAM chip is what holds the config and RT clock. I'm not completely sure if when they go bad that it will stop the Falcon from working but it is worth a shot. Most of the NVRAM chips will have died by now. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.