Willsy Posted May 6, 2013 Share Posted May 6, 2013 This is what Bill posted when he uploaded them. [/indent] I've re-instated them, but they're in a slightly different location. They're now in: Documents\PDF Documents\TI 99/4A\Software\Forth Or, just enter hacking forth into the search screen (which you'll find in the My Planet-99 menu at the top of the screen). The documents on that site seemed to be arranged in a bizarre order; it's as if Bill started a re-organisation, but left it in-complete. I'll have to take a look at it. Of course.... if there are any volunteers...! Owen? I can give your login appropriate permissions to arrange/move/delete folders and files... Quote Link to comment Share on other sites More sharing options...
Opry99er Posted May 6, 2013 Share Posted May 6, 2013 Of course I'd be more than happy to do it, Willsy!! I'll have a look see at the site today to try and wrap .my head around a gameplan Quote Link to comment Share on other sites More sharing options...
+Lee Stewart Posted May 7, 2013 Author Share Posted May 7, 2013 OK...Here's the finished TI Forth Instruction Manual, 2nd LES Edition at long last! Unless someone finds errors before I get a message to him, I'll get @retroclouds to post it to the development thread. A summary of enhancements is in §1.2. @Willsy, in particular, if you have a few minutes, take a look at Chapter 9 "TI Forth 9900 Assembler" to see whether I've gone off the deep end. TI_FORTH_Manual-2ndEd(LES).pdf ...lee 1 Quote Link to comment Share on other sites More sharing options...
Willsy Posted May 7, 2013 Share Posted May 7, 2013 Morning, Lee. Just read chapter 9 through. Very clear and easily understandable, at least to this Forther! A top job. I didn't detect any typo's or bad grammar either (not that I expected any!). Top job! I hereby elect you as editor-in-chief for my book when I finally get around to finishing it! Quote Link to comment Share on other sites More sharing options...
+FarmerPotato Posted October 5, 2016 Share Posted October 5, 2016 I'm doing FORTH programming currently. It's refreshing to review the TI FORTH manual. So many memories of 80s programming, when I would search the printed copy for knowledge. TI FORTH was my second language, after TI BASIC. Thanks for providing this. Quote Link to comment Share on other sites More sharing options...
+Lee Stewart Posted October 6, 2016 Author Share Posted October 6, 2016 On 10/5/2016 at 12:41 PM, FarmerPotato said: I'm doing FORTH programming currently. It's refreshing to review the TI FORTH manual. So many memories of 80s programming, when I would search the printed copy for knowledge. TI FORTH was my second language, after TI BASIC. Thanks for providing this. You are most welcome. You might also be interested in what I did after editing and publishing the TI Forth manual. I developed a file-based version of TI Forth as fbForth 1.0 that I then hoisted into cartridge space as fbForth 2.0, which gives you nearly all of the upper 24KiB of the 32KiB expansion RAM for programming. Binaries, manuals and cartridges are all available in post #1 of this thread: fbForth—TI Forth with File-based Block I/O. Except for how blocks (screens) are loaded and saved, I tried to maintain compatibility with TI Forth. In the system blocks file, FBLOCKS, I wrote Forth words to copy to and from TI Forth from and to fbForth. MENU will show you what is available in FBLOCKS. ...lee 1 1 Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted September 16, 2017 Share Posted September 16, 2017 Hi, here is my updated list for Forth: Forth TI-99-4A-SW-FORTH-v1.03b.pdf 49.12KB 1.687.578 downloads xXx ( Backup-Link: http://atariage.com/forums/topic/241978-ti-994a-resources-lists-lists-and-some-lists/?p=3849223) 1 Quote Link to comment Share on other sites More sharing options...
+Lee Stewart Posted October 6, 2020 Author Share Posted October 6, 2020 FYI, I reformatted quite a few of my posts in this thread. Some did not fare well with the forum upgrade. ...lee 2 Quote Link to comment Share on other sites More sharing options...
+TheBF Posted October 6, 2020 Share Posted October 6, 2020 On 5/6/2013 at 9:06 PM, Lee Stewart said: OK...Here's the finished TI Forth Instruction Manual, 2nd LES Edition at long last! Unless someone finds errors before I get a message to him, I'll get @retroclouds to post it to the development thread. A summary of enhancements is in §1.2. @Willsy, in particular, if you have a few minutes, take a look at Chapter 9 "TI Forth 9900 Assembler" to see whether I've gone off the deep end. TI_FORTH_Manual-2ndEd(LES).pdf 1.29 MB · 46 downloads ...lee A labor of love is this. Thanks. I still have my paper copy of the original that came with the diskettes when I bought them. 2 Quote Link to comment Share on other sites More sharing options...
+Lee Stewart Posted October 6, 2020 Author Share Posted October 6, 2020 37 minutes ago, TheBF said: I still have my paper copy of the original that came with the diskettes when I bought them. Me, too! ...lee 2 Quote Link to comment Share on other sites More sharing options...
+Ksarul Posted October 6, 2020 Share Posted October 6, 2020 Me three! Now who will get the Forth? 1 1 Quote Link to comment Share on other sites More sharing options...
GDMike Posted October 6, 2020 Share Posted October 6, 2020 (edited) I once had a TI Forth package.. but lost it along the way. Edited October 6, 2020 by GDMike Quote Link to comment Share on other sites More sharing options...
atrax27407 Posted October 6, 2020 Share Posted October 6, 2020 I am the Forth 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.