flashjazzcat Posted April 12, 2013 Share Posted April 12, 2013 (edited) You must be kidding, right . That's 10 times more soldering, even the experienced solderers aren't prone to mistakes as I've seen it with my own eyes before.... No - not kidding at all. If you can't solder for s**t, you'll make a mess of four wires, forty or four hundred - that's the point. Also - four hundred is a hundred times four, not ten times four. In any case, I wouldn't dispute that it takes longer to solder something the more wires there are. I assume what you saw with your own eyes (and I assume what you're trying to say is that experienced solderers are prone to mistakes) was a loose wire (i.e. bad joint) on one of my XM301 conversions, which you were kind enough to fix. No doubt you were delighted by the opportunity to allude to this. Yes - everyone makes the odd mistake, but the non-solderer will habitually butcher even the most elementary jobs. I hope the point I'm trying to make is fairly clear now. Edited April 12, 2013 by flashjazzcat Quote Link to comment Share on other sites More sharing options...
atari8warez Posted April 12, 2013 Share Posted April 12, 2013 (edited) No doubt you were delighted by the opportunity to allude to this... You're wrong, I wasn't delighted at all...It was just a proof that even experienced people make mistakes and I used this example to make a point here that the more soldering you have to do, the more chances for mistakes, it's simply a statistical fact... You seem to exagerate certain things just to make your point seem valid. It does make a difference whether you do 4 or 400 wires, it simply means you are 100 times more likely to make a mistake. And isn't it obvious if you can't solder s**t, you shouldn't be even attempting to screw around with electronics? Edited April 12, 2013 by atari8warez Quote Link to comment Share on other sites More sharing options...
Bumzyman Posted April 16, 2013 Share Posted April 16, 2013 Is the switch in this picture a (NO) Momentary SPST like this one here? I want to order a few so I have them on hand when the boards start shipping. Quote Link to comment Share on other sites More sharing options...
candle Posted April 16, 2013 Author Share Posted April 16, 2013 yup Quote Link to comment Share on other sites More sharing options...
Kjmann Posted April 16, 2013 Share Posted April 16, 2013 I'd like one. PM Sent to Candle. Quote Link to comment Share on other sites More sharing options...
Bumzyman Posted April 16, 2013 Share Posted April 16, 2013 Cool Thanks for the quick response. Quote Link to comment Share on other sites More sharing options...
mimo Posted April 17, 2013 Share Posted April 17, 2013 put me on the list for another board if it's not too late. Thanks Quote Link to comment Share on other sites More sharing options...
candle Posted April 17, 2013 Author Share Posted April 17, 2013 not too late until Sunday (21th of April), then preorder phase closes Quote Link to comment Share on other sites More sharing options...
candle Posted April 21, 2013 Author Share Posted April 21, 2013 ok, preorder phase is closed here you'll find the list and current status of your order please wait for futher instructions Quote Link to comment Share on other sites More sharing options...
Firedawg Posted April 22, 2013 Share Posted April 22, 2013 Thanks Sebastian! Payment sent. Mike Quote Link to comment Share on other sites More sharing options...
bandit Posted April 22, 2013 Share Posted April 22, 2013 Thanks Again Sebastian !!! Payment sent.. Quote Link to comment Share on other sites More sharing options...
retrobits Posted April 22, 2013 Share Posted April 22, 2013 Payment sent. Thank you very much for doing all the work to make this 2nd run possible. Quote Link to comment Share on other sites More sharing options...
+slx Posted April 22, 2013 Share Posted April 22, 2013 Thanks! Payment sent. It's really great to see the personality board "option" of the 800 used after such a long time! Quote Link to comment Share on other sites More sharing options...
candle Posted April 22, 2013 Author Share Posted April 22, 2013 Thank you all updated list Quote Link to comment Share on other sites More sharing options...
TailChao Posted April 22, 2013 Share Posted April 22, 2013 Payment sent. Thanks again! Quote Link to comment Share on other sites More sharing options...
Bumzyman Posted April 22, 2013 Share Posted April 22, 2013 Just sent over my payment as well. Thanks for all the great work Candle! Quote Link to comment Share on other sites More sharing options...
candle Posted April 23, 2013 Author Share Posted April 23, 2013 and updated list Quote Link to comment Share on other sites More sharing options...
Thorsten Günther Posted April 24, 2013 Share Posted April 24, 2013 Payment sent this morning, sorry for the lag. Quote Link to comment Share on other sites More sharing options...
COBRAIP Posted April 25, 2013 Share Posted April 25, 2013 Payment sent Yesterday sorry for all the confusion with the $ conversion. Thanks again Candle for your help. Quote Link to comment Share on other sites More sharing options...
oldschool84 Posted April 25, 2013 Share Posted April 25, 2013 Money has been sent! Thanks!!! Oldschool84 Quote Link to comment Share on other sites More sharing options...
candle Posted April 25, 2013 Author Share Posted April 25, 2013 and updated list Quote Link to comment Share on other sites More sharing options...
candle Posted May 27, 2013 Author Share Posted May 27, 2013 finally, boards are here! now i can start assembly i'm still waiting on cpld chips (they suppose to be here in next week or so), but at least i can start right now with all remaining parts also i've ordered 40 boards, so i have little more than i need for everyone, so if anyone else would be interested - just drop me a PM Sebastian 2 Quote Link to comment Share on other sites More sharing options...
Faicuai Posted May 27, 2013 Share Posted May 27, 2013 finally, boards are here! now i can start assembly i'm still waiting on cpld chips (they suppose to be here in next week or so), but at least i can start right now with all remaining parts also i've ordered 40 boards, so i have little more than i need for everyone, so if anyone else would be interested - just drop me a PM Sebastian Sebastian: Would like to place an order for a second unit. Please, PM with updated payment instructions, at your earliest convenience. NOTE: PM Sent! Thanks! Quote Link to comment Share on other sites More sharing options...
yell0w_lantern Posted May 30, 2013 Share Posted May 30, 2013 PM Sent. Quote Link to comment Share on other sites More sharing options...
candle Posted June 11, 2013 Author Share Posted June 11, 2013 update: all bottom parts are on panels, and for top side - all passive components are soldered in todo: semiconductors and connectors i still haven't received cpld chips from my supplier, ETA for this is this week (10-16 of june) to all who PM me about purchasing a board - i'll reply... soon, just need to get most outstanding assigments finnished 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.