yell0w_lantern Posted March 24, 2014 Share Posted March 24, 2014 Tried putting in an Incognito board and experienced problems. I suspect something is going on with my power board. I'm reading power switch continuity and I get about 11V AC from both the plug and the switch. I tried checking voltage a few places on the board and didn't see much activity. Neither the 5V nor the 12V linear voltage regulators appear to be putting out anything. On the input leg of the 12V I get something when I have my multimeter on AC. Should I just replace my voltage regulators and see what happens? Is there anything that usually craps out on the power board that I should be checking? Quote Link to comment Share on other sites More sharing options...
AtariGeezer Posted March 24, 2014 Share Posted March 24, 2014 Are these checks done with the Cartridge Door switch in the closed position? Quote Link to comment Share on other sites More sharing options...
yell0w_lantern Posted March 24, 2014 Author Share Posted March 24, 2014 D'OH! The trap door was the last thing I was going to put back on. I didn't even know it had that feature. This is what happens when a stupid Commodore user starts messing around with Atari machines. Thank you, sir Quote Link to comment Share on other sites More sharing options...
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.