Guest Posted April 10, 2017 Share Posted April 10, 2017 useful addition: firmware via SD should be great Quote Link to comment Share on other sites More sharing options...
waryl Posted April 10, 2017 Share Posted April 10, 2017 I would like one assembled unit. Shipping to Poland. Quote Link to comment Share on other sites More sharing options...
darwinmac Posted April 22, 2017 Share Posted April 22, 2017 I need to remove myself from the list. I wanted you to know so you could move someone else up the list. Bob C Quote Link to comment Share on other sites More sharing options...
Guest Posted April 22, 2017 Share Posted April 22, 2017 @alsp when do you require payment? also, my green case is fine to be drilled for LEDs to be visible if it's easier for you Quote Link to comment Share on other sites More sharing options...
alsp Posted April 23, 2017 Author Share Posted April 23, 2017 I need to remove myself from the list. I wanted you to know so you could move someone else up the list. Bob C Ok, no problem @alsp when do you require payment? also, my green case is fine to be drilled for LEDs to be visible if it's easier for you Right after device will be assembled and ready to send. About holes - no problem. PS: I still waiting PCBs delivery. 1 Quote Link to comment Share on other sites More sharing options...
Frognum Posted April 27, 2017 Share Posted April 27, 2017 Hello!Which colors would have the device available? I mean, it would be XL or XE style? Would you send a PM informing us its availability or you just will post it?Thanks from Chile! Quote Link to comment Share on other sites More sharing options...
alsp Posted April 27, 2017 Author Share Posted April 27, 2017 (edited) Which colors would have the device available? I mean, it would be XL or XE style? Would you send a PM informing us its availability or you just will post it? Thanks from Chile! Colors limited only by color of fimament that I have. nowadays its pure white, orange and green, If you like some other color - you have several posibilities 1) You can send me filament that you need (or just send me money for it and I can buy it in nearest shop), 2) You can take white one and use color spray, 3) You can use models that I've put on github and order case on some online 3D printing service (in this case you will need to combine all parts togeather on your side) When I finally get PCBs from customs (for a while there are issues with it), I'll start producing devices. When your device will be ready I'll write you personal message with link to invoice. When you'll pay - I'll send device to you. Edited April 27, 2017 by alsp 3 Quote Link to comment Share on other sites More sharing options...
+KlasO Posted May 1, 2017 Share Posted May 1, 2017 One assembled for me, please. My sincere apologies but I have to cancel my order due to unforeseen problems. I'm sorry for the trouble this is causing you. Kind regards, Klas Quote Link to comment Share on other sites More sharing options...
fandenivoldsk Posted May 1, 2017 Share Posted May 1, 2017 Could you update the preorder list? Quote Link to comment Share on other sites More sharing options...
tep392 Posted May 2, 2017 Share Posted May 2, 2017 I'm really looking forward to this. 1 Quote Link to comment Share on other sites More sharing options...
arctus Posted May 2, 2017 Share Posted May 2, 2017 If it's not too late, add me with one assembled unit, please. Quote Link to comment Share on other sites More sharing options...
Bumzyman Posted May 3, 2017 Share Posted May 3, 2017 I would like to reserve an assembled unit if its not to late. Quote Link to comment Share on other sites More sharing options...
alsp Posted May 6, 2017 Author Share Posted May 6, 2017 Current preorder list: ravard - 1 assembled device + PCB + Case; JoSch - 2 assembed devices; Philsan - 1 assembled device; beamer320i - 1 assembled device; gozar - 2 assembled devices; Firedawg - 1 assembled device + 2 PCB + 2 Cases; akator - 1 assembled device; fastofruto - 1 assembled device; Witchboard - 1 PCB + 1 Case + 1 pre-programmed ARM (Can add all required components for additional 8$); tep392 - 1 assembled device; AtariBuff - 1 assembled device; Sleepy - 1 assembled device; skel28 - 1 assembled device; skr - 1 assembled device; areeve - 1 assembled device; npturton - 1 assembled device; pps - 1 assembled device; SenorRossie - 1 assembled device + 1 full kit for self assembling; rdea6 - 1 assembled device; toiletunes - 1 assembled device; thgill - 2 assembled device; pboland - 1 assembled device; Defender II - 2 assembled device; VicViper - 1 assembled device; orpheuswaking - 1 assembled device; venom4728a - 1 assembled device; jcbstein - 1 assembled device; olix - 1 assembled device; Evidious - 1 assembled device; jvas - 1 assembled device; twh/f2 - 1 assembled device; mckafka99 - 1 assembled device; atarian63 - 2 assembled devices; Awch - 1 assembled device; Stephen - 1 full kit for self assembling jcbstein - 2 assembled devices; Gandor - 2 assembled devices; tuf - 1 assembled device; kazmat - 2 full kits for self assembling brenski - 1 assembled device; Android8675 - 1 assembled device; Poison - 1 assembled device; Atari Nut - 1 assembled device; awesp - 2 assembled devices; Brentarian - 1 assembled device; nikolaisen - 1 assembled device; skywalkeriom - 1 assembled device; mytekcontrols - 1 assembled device; docertabum01 - 1 assembled device; rdemming - 1 assembled device; Fletch - 1 assembled device; pedgarcia - 1 assembled device; Frognum - 1 assembled device; WildBill777 - 1 assembled device; 917k - 1 assembled device; gobo - 1 assembled device; davidcalgary29 - 2 assembled devices; tecci06 - 1 assembled device; ijor - 1 assembled device; fandenivoldsk - 2 assembled devices; pseudografx - 1 assembled device; sloopy - 2 full kits for self assembling uunek - 1 assembled device; gargoyle - 1 full kit for self assembling RodLightning - 1 assembled device; WIZZARD77 - 1 assembled device; slx - 1 assembled device; rkindig - 1 assembled device; mamejay - 1 full kit for self assembling yerzmyey - 1 assembled device; pjbramley - 1 assembled device; Lios - 1 assembled device; xrbrevin - 1 assembled device; waryl - 1 assembled device; Chongo Chile - 2 assembled devices; arctus - 1 assembled device; Bumzyman - 1 assembled device; PS: Please note - I have temporary issues with customs (parcel with PCBs) - so production of devices is delayed little bit. As soon as I get my parcel from cusoms - I'll write down. 5 Quote Link to comment Share on other sites More sharing options...
gargoyle Posted May 6, 2017 Share Posted May 6, 2017 Wow, close to 90 units, you'll have some work to do for sure 1 Quote Link to comment Share on other sites More sharing options...
alsp Posted May 7, 2017 Author Share Posted May 7, 2017 Wow, close to 90 units, you'll have some work to do for sure You right! a lot of work =) 2Everyone: Please help me with unique name for this device in this thread Quote Link to comment Share on other sites More sharing options...
mattsoft Posted May 12, 2017 Share Posted May 12, 2017 Too late to be added? Declaring interest in 1 fully assembled. Thanks!! Quote Link to comment Share on other sites More sharing options...
killersquirel Posted May 14, 2017 Share Posted May 14, 2017 I would like to order 1 assembled unit. Thank you. Quote Link to comment Share on other sites More sharing options...
Mr.Bacardi Posted May 15, 2017 Share Posted May 15, 2017 If it's not too late, I would be interested in 1 fully assembled unit too! Quote Link to comment Share on other sites More sharing options...
alsp Posted May 15, 2017 Author Share Posted May 15, 2017 I would like to order 1 assembled unit. Thank you. If it's not too late, I would be interested in 1 fully assembled unit too! Ok, you're both in list. 2Future device owners: please vote for the new name of SDrive-ARM on this topic. Quote Link to comment Share on other sites More sharing options...
alsp Posted May 22, 2017 Author Share Posted May 22, 2017 Based on the poll result, new name for this device is SDrive2 MrFish - can receive 50% discount - congratulations! (but it seems he is not in the queue...). Any voluenteer designers here who can help to create stiker for device? Otherwise I'll create it by myself... but I don't have designer skills PS: Finally I've won WAR with Customs and it seems tommorow or day after tomoorow I'll able to get PCBs from post. Right after it I will be ready to send DIY Kits and start device assembling. So - head of the queue - be prepared =) 2 Quote Link to comment Share on other sites More sharing options...
+MrFish Posted May 22, 2017 Share Posted May 22, 2017 Based on the poll result, new name for this device is SDrive2 MrFish - can receive 50% discount - congratulations! (but it seems he is not in the queue...). Cool... I was just having fun coming up with names. I can't really afford one right now (even at a discount), so you can give the discount to Orpheus, since he thought he invented the name too. Any voluenteer designers here who can help to create stiker for device? Otherwise I'll create it by myself... but I don't have designer skills I might be interested in helping with the label too. It depends on what you have in mind. Maybe you can PM me some details. Quote Link to comment Share on other sites More sharing options...
Defender II Posted May 22, 2017 Share Posted May 22, 2017 Based on the poll result, new name for this device is SDrive2 MrFish - can receive 50% discount - congratulations! (but it seems he is not in the queue...). Any voluenteer designers here who can help to create stiker for device? Otherwise I'll create it by myself... but I don't have designer skills PS: Finally I've won WAR with Customs and it seems tommorow or day after tomoorow I'll able to get PCBs from post. Right after it I will be ready to send DIY Kits and start device assembling. So - head of the queue - be prepared =) I was at the hospital or I would have voted for my own suggestion and it would still be a tie. Quote Link to comment Share on other sites More sharing options...
alsp Posted May 27, 2017 Author Share Posted May 27, 2017 (edited) Finally I've done it! I've win war with Customs and get everything that needed for device construction. Moreover, I've already build first 15 devices: and some of you already receive PM with request for E-Mail address for PayPal invoice =) Devices ready to send right after stikers will be done (if some of you would'nt wait for it - just PM me and I send it to you ASAP): So, there are still a lot of work to do: And if you still do not receive PM from me, be patient, I plan to work hard for create remaining items. Best regards, Alexey Edited May 27, 2017 by alsp 12 Quote Link to comment Share on other sites More sharing options...
FULS Posted May 27, 2017 Share Posted May 27, 2017 I would like to order one assembled unit if still available. Quote Link to comment Share on other sites More sharing options...
tep392 Posted May 27, 2017 Share Posted May 27, 2017 Paid! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.