byonddrivn Posted September 3, 2017 Share Posted September 3, 2017 Hello, I've had some trouble with glitchy graphics on my Colecovision and when powering it up, most times I have to flip it on and off a couple times before it actually turns on. I assumed the switch needed regreasing so I pulled it apart, cleaned it up, applied some grease, and soldered it back together. When I tried to test it, I get nothing now. Is it possible to put the switch in backwards? I figured I'd ask before taking it all apart again. Thanks Quote Link to comment Share on other sites More sharing options...
the_crayon_king Posted September 12, 2017 Share Posted September 12, 2017 (edited) It should be the same backwards or forwards (as in there is no backwards or forwards). I just looked at mine it looks like a DPDT switch. I'd think maybe that grease is not allowing a connection ? Edited September 12, 2017 by the_crayon_king Quote Link to comment Share on other sites More sharing options...
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.