ninsei Posted January 23, 2019 Share Posted January 23, 2019 Hi. Took apart my Lynx 2 a few times for other repairs and up stopped working on the dpad. Everything else works. Quote Link to comment Share on other sites More sharing options...
GadgetUK Posted January 23, 2019 Share Posted January 23, 2019 Could be a dirty connection on the underside of the button (the carbon pad - just gently wipe it with IPA). More common if you've taken it to bits a few times previously is the carbon can wear off the ribbon edge where it plugs into the PCB. That can mean that one trace isn't making a connection when you plug it in. If that's the cause you either need a new flex ribbon assembly, or sometimes you can trim a tiny tiny piece off the edge of the ribbon which means when it is pushed back in it goes further into the socket. Quote Link to comment Share on other sites More sharing options...
ninsei Posted January 23, 2019 Author Share Posted January 23, 2019 It was the ribbon. Thx. 1 Quote Link to comment Share on other sites More sharing options...
ninsei Posted January 23, 2019 Author Share Posted January 23, 2019 It was the ribbon. Thx. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.