Mr Robot Posted August 16, 2019 Author Share Posted August 16, 2019 If anyone who has ordered one would like to get it in black, now is the time to PM me and say, before I start gluing stuff together. 2 Quote Link to comment Share on other sites More sharing options...
Mr Robot Posted August 17, 2019 Author Share Posted August 17, 2019 The beige filament I have is nearly gone and they won't have any more in stock until mid next month so I ordered something else that I thought might be a better colour match. That looks great under natural light but goes completely the wrong colour under incandescents so today I'm going to try again. Black is better than any brown I can find so I'm switching to that. 2 Quote Link to comment Share on other sites More sharing options...
+orpheuswaking Posted August 17, 2019 Share Posted August 17, 2019 17 hours ago, toddtmw said: TBH, I think it looks better. I don't disagree, now you have me thinknig about asking for mine in black LOL Quote Link to comment Share on other sites More sharing options...
Mr Robot Posted August 17, 2019 Author Share Posted August 17, 2019 I think I'm just going to make them all in black, the brown is just too chocolaty. 1 Quote Link to comment Share on other sites More sharing options...
+StaxX28 Posted August 18, 2019 Share Posted August 18, 2019 (edited) I just finished to print the 1010 case Thanks you Mr Robot for this excellent works Edited August 18, 2019 by StaxX28 3 Quote Link to comment Share on other sites More sharing options...
Mr Robot Posted August 18, 2019 Author Share Posted August 18, 2019 It looks great! What filament do you use? Those colours look really close Quote Link to comment Share on other sites More sharing options...
_The Doctor__ Posted August 18, 2019 Share Posted August 18, 2019 This might be a great sticky thread if it catches on, Atari color filament choices and 3D print Area! 2 Quote Link to comment Share on other sites More sharing options...
+StaxX28 Posted August 18, 2019 Share Posted August 18, 2019 Mr Robot, I used this three PLA filaments : Eryone - Silver Chromatik - Chocolate Eolas - Beige 1 Quote Link to comment Share on other sites More sharing options...
Mr Robot Posted August 18, 2019 Author Share Posted August 18, 2019 NT 5 3 Quote Link to comment Share on other sites More sharing options...
_The Doctor__ Posted August 18, 2019 Share Posted August 18, 2019 (edited) 14 minutes ago, Mr Robot said: I created an Atari 3D printing club where people can share designs hints tips etc. Now you have to get that into club members signatures, auto-promoting the club. It's going to require lead in posts or cross posts to get folks to the club. It probably take a couple days to get the club set up though.. Edited August 18, 2019 by _The Doctor__ 1 Quote Link to comment Share on other sites More sharing options...
+orpheuswaking Posted August 19, 2019 Share Posted August 19, 2019 Yes Yes BLACK for me! 1 Quote Link to comment Share on other sites More sharing options...
gooner4life7 Posted August 21, 2019 Share Posted August 21, 2019 Thanks you for sharing Here's what I went with and its looks good thanks again. 3 Quote Link to comment Share on other sites More sharing options...
Kyle22 Posted August 23, 2019 Share Posted August 23, 2019 That's nice. Quote Link to comment Share on other sites More sharing options...
chuckcaley Posted August 26, 2019 Share Posted August 26, 2019 I use Eolas Beige (Bone on there website) Eolas Grey and the silver is Prusament PLA at the moment. and im using Dagoma Chromatik pla Beige at the moment as Eolas was sold out on amazon. 4 Quote Link to comment Share on other sites More sharing options...
Mr Robot Posted August 30, 2019 Author Share Posted August 30, 2019 (edited) Edited August 31, 2019 by Mr Robot Added Pics 8 Quote Link to comment Share on other sites More sharing options...
Mr Robot Posted September 3, 2019 Author Share Posted September 3, 2019 Now that the printing is in full swing, the basement assembly station is starting to resemble a successful 1990's copy party in miniature! Postage materials will be here this week, new Khaki filament arrived today, more beige on Friday. Small flotilla of Benchy's in the background there 10 Quote Link to comment Share on other sites More sharing options...
Mr Robot Posted September 4, 2019 Author Share Posted September 4, 2019 If anyone has been undecided about getting one of these, the 1050's are nearly at the max 20, the other three are around the 10 mark. I'm currently adding names to a wait list but I'm not taking money until I'm nearly ready to print. Quote Link to comment Share on other sites More sharing options...
_The Doctor__ Posted September 4, 2019 Share Posted September 4, 2019 XF's and 1050's all around! Quote Link to comment Share on other sites More sharing options...
CMR Posted September 8, 2019 Share Posted September 8, 2019 Thanks for the updates. Quote Link to comment Share on other sites More sharing options...
pseudografx Posted September 11, 2019 Share Posted September 11, 2019 Hi, how about this design? 3 Quote Link to comment Share on other sites More sharing options...
CMR Posted September 17, 2019 Share Posted September 17, 2019 I got mine in today. It looks great, and is a snug fit. Works perfect. 1 Quote Link to comment Share on other sites More sharing options...
Mr Robot Posted October 8, 2019 Author Share Posted October 8, 2019 Last weeks SDrive-Max case orders about to be packed up and mailed. I am now up to date with my printing! These all got mailed today. If you want a case but haven't contacted me yet, you should send me a DM. I only have a few left and this is the last time I will be plugging them. After this if you want one and can't print your own it will be up to eBay sellers and Gavin 6 Quote Link to comment Share on other sites More sharing options...
+mytek Posted October 8, 2019 Share Posted October 8, 2019 Damn that's quite the production you got going! And they all look fantastic ? . 1 Quote Link to comment Share on other sites More sharing options...
Mr Robot Posted October 8, 2019 Author Share Posted October 8, 2019 I'll be able to get the case you wanted finished soon Do you have an Sdrive-max? Quote Link to comment Share on other sites More sharing options...
+mytek Posted October 8, 2019 Share Posted October 8, 2019 8 minutes ago, Mr Robot said: I'll be able to get the case you wanted finished soon Do you have an Sdrive-max? No Sdrive-max over here. It's a really nice product, but with IDE/CF capability in all my 'new' systems I really don't have a need at this time. No rush on the special case project, because it certainly looks like you have your hands full for the time being. Of course I'm still very interested in seeing it completed, and know I'll love it based on what you already PM'ed me. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.