santosp Posted January 22, 2022 Share Posted January 22, 2022 Hello to all, Once again and for a limited pieces, the 5 in 1 OSS is available to anyone interested member. This time the construction was designed and placed inside the new cartridge from Sikor. ? I dare say an excellent copy of Atari XEGS cartridge! ? This version includes two buttons in the upper side of cartridge, so you can select programs up and down, faster. The seven segment display is located inside the transparent shell and it is perfectly visible. The eeprom has placed on a ic socket so one can easily change it. A new feature that I have added to this version, is the use of the 3 extra places of the eeprom from the user. So if anyone want this, they can inform me so that I can leave the menu free to count to "8", and write for him there three 16KB games of his choice. Also in its final form it will include a colorful sticker. What is shown in the photo is a preview to show how the product will be in final stage. The cost of each is 40 euro plus shipping. Feel free to send me a message if someone interested. ? 4 Quote Link to comment Share on other sites More sharing options...
+David_P Posted January 22, 2022 Share Posted January 22, 2022 I have one of the 2013 edition - highly recommended. 2 Quote Link to comment Share on other sites More sharing options...
BobJones Posted January 22, 2022 Share Posted January 22, 2022 I would be interested!Sent from my Pixel 4 XL using Tapatalk Quote Link to comment Share on other sites More sharing options...
ndary Posted January 22, 2022 Share Posted January 22, 2022 (edited) Hi Panos, I am interested and i would like to add to the 3 more software to extra 16banks, Altirra Basic, Synasoft Assembler, and Assembler Editor Nir Edited January 22, 2022 by ndary 1 Quote Link to comment Share on other sites More sharing options...
santosp Posted January 22, 2022 Author Share Posted January 22, 2022 (edited) @ndary Hi Nir, These 3 extra software follows the standard 16K logic of Atari Cartridges? Edited January 22, 2022 by santosp Quote Link to comment Share on other sites More sharing options...
+Spancho Posted January 22, 2022 Share Posted January 22, 2022 I would like one. Quote Link to comment Share on other sites More sharing options...
nikolaisen Posted January 22, 2022 Share Posted January 22, 2022 (edited) Hello. I am interested as well. If you are able I would like the same configuration as Nir requested. “I would like to add to the 3 more software to extra 16banks, Altirra Basic, Synasoft Assembler, and Assembler Editor.” Thanks, Eric Edited January 22, 2022 by nikolaisen Quote Link to comment Share on other sites More sharing options...
erichenneke Posted January 22, 2022 Share Posted January 22, 2022 I'm interested. And please leave room for 8. I will decide on those 3 extra option choices later. Perhaps the same as Nir if those will work. Eric Quote Link to comment Share on other sites More sharing options...
+Stephen Posted January 23, 2022 Share Posted January 23, 2022 5 hours ago, David_P said: I have one of the 2013 edition - highly recommended. Same - great cart. 3 Quote Link to comment Share on other sites More sharing options...
cfernan Posted January 23, 2022 Share Posted January 23, 2022 Hello, I am also interested. I would like to add the following: Atari Logo, Altirra Basic and Microsoft Basic. Thanks, Claudio Quote Link to comment Share on other sites More sharing options...
Pmetzen Posted January 23, 2022 Share Posted January 23, 2022 (edited) For me please a module. Leave room for 8 and I want to add XEGS OS. Edited January 23, 2022 by Pmetzen Quote Link to comment Share on other sites More sharing options...
Pmetzen Posted January 23, 2022 Share Posted January 23, 2022 What exactly is The Writers Tool and what can you do with it? Quote Link to comment Share on other sites More sharing options...
ACML Posted January 23, 2022 Share Posted January 23, 2022 Question: If it requires power on to select which cartridge using the buttons and LED numerical display, how do you change selection with the power already on. I mean the computer is already booted. Are you hot swapping from one to the other with computer up? Does it force a hard reset to switch from MAC/65 to Action! ? Quote Link to comment Share on other sites More sharing options...
santosp Posted January 23, 2022 Author Share Posted January 23, 2022 (edited) 3 minutes ago, ACML said: Question: If it requires power on to select which cartridge using the buttons and LED numerical display, how do you change selection with the power already on. I mean the computer is already booted. Are you hot swapping from one to the other with computer up? Does it force a hard reset to switch from MAC/65 to Action! ? With computer on you can do your selection and after to press the soft reset on your Atari. Computer in reality do a hard reset and your software is load there. There is also an option where the cartridge remains inactive even though it is connected to the atari cartridge port. In fact the cartridge starts with this option (off) every time you did power cycle your Atari. Edited January 23, 2022 by santosp Quote Link to comment Share on other sites More sharing options...
santosp Posted January 23, 2022 Author Share Posted January 23, 2022 29 minutes ago, Pmetzen said: What exactly is The Writers Tool and what can you do with it? https://atariwiki.org/wiki/Wiki.jsp?page=The WriterS Tool Quote Link to comment Share on other sites More sharing options...
xrbrevin Posted January 23, 2022 Share Posted January 23, 2022 i had to go here: https://web.archive.org/web/20210123162314/https://atariwiki.org/wiki/Wiki.jsp?page=The WriterS Tool Quote Link to comment Share on other sites More sharing options...
ndary Posted January 23, 2022 Share Posted January 23, 2022 20 hours ago, santosp said: @ndary Hi Nir, These 3 extra software follows the standard 16K logic of Atari Cartridges? Hi @santosp i will you the Roms Quote Link to comment Share on other sites More sharing options...
ndary Posted January 23, 2022 Share Posted January 23, 2022 1 hour ago, santosp said: With computer on you can do your selection and after to press the soft reset on your Atari. Computer in reality do a hard reset and your software is load there. There is also an option where the cartridge remains inactive even though it is connected to the atari cartridge port. In fact the cartridge starts with this option (off) every time you did power cycle your Atari. @santosp if the cartridge starts as off after power cycle, can you software control the selection? Quote Link to comment Share on other sites More sharing options...
santosp Posted January 23, 2022 Author Share Posted January 23, 2022 @ndary 1. Thank you. 2. What you mean "software"? You will need to use one of the two buttons in the upper side of the cartridge, to count the seven segment display up or down. Afterward you must press the reset button on your Atari. Quote Link to comment Share on other sites More sharing options...
xrbrevin Posted January 24, 2022 Share Posted January 24, 2022 Hi Panos, 1 please with all 8 slots can i add my own 16k roms by re-flashing the EPROM with them added on the end or is the process more sophisticated? cheers Quote Link to comment Share on other sites More sharing options...
santosp Posted January 24, 2022 Author Share Posted January 24, 2022 @xrbrevin No isn't sophisticated, but I must to know if you wish to use only simple 16k software or the special one from OSS, as to prepare the firmware. As is now it can handle the software as follows. 1 to 5 places as OSS tolls. 6 to 8 places as simple 16 KB software - games. So I mean that if you want to burn this with full 8 * 16k programs, it wont work as it is now . Quote Link to comment Share on other sites More sharing options...
Mr Robot Posted February 11, 2022 Share Posted February 11, 2022 With the extra slots in this revision of the cart could the much desired 7-in-1 be made? Quote Link to comment Share on other sites More sharing options...
CMR Posted February 11, 2022 Share Posted February 11, 2022 People are asking for software that is too big. It has to be 16k or less. Quote Link to comment Share on other sites More sharing options...
santosp Posted February 11, 2022 Author Share Posted February 11, 2022 3 hours ago, Mr Robot said: With the extra slots in this revision of the cart could the much desired 7-in-1 be made? Yes is possible to add there everything, as long as the file is up to 16k and in cartridge form. Quote Link to comment Share on other sites More sharing options...
CMR Posted February 12, 2022 Share Posted February 12, 2022 Ok, I may have been mistaken about some of the software people were asking for as being too big. Please disregard. I would also like a cart, and want to add, Synassembler XL, Microsoft Basic II, and Assembler Editor. All these are on Atarimania and I would like US versions when applicable. If you need any links or help finding things let me know. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.