ulao Posted February 15, 2022 Share Posted February 15, 2022 I tried to look up the pinout today and kept seeing this... OUT(Orange,Top row, near right) SCK(White,Top row, near left) DO(Yellow,Top row, center) GND(Black,Bottom row, near left 5V(Red,Bottom row, near right) but from my own testing its a standard atari port. I even connected my 7800 controller and it works like it did on the 2600. This is the flash back I have Were there other versions that have a clock serial data pinout, or do the ports have two modes? There is no way the paddles included (that work just like the old ones) would work on this pinout above. Quote Link to comment Share on other sites More sharing options...
ulao Posted February 15, 2022 Author Share Posted February 15, 2022 (edited) huh, I also just noticed that u,d,l,r and button all work in the menu. But when the game starts, only u,d, and button work. Edited February 15, 2022 by ulao Quote Link to comment Share on other sites More sharing options...
ulao Posted February 16, 2022 Author Share Posted February 16, 2022 (edited) Ah! looks like it was the 7800 controller as it has two resisters in there for the paddle ports. Looks like the console detects that is disables left and right (old school paddle buttons) intentionally. Makes good sense, I thought the old 2600 would work with the 7800, maybe that changed? Also read on another thread that there were special modes, and I wired up a switch but they do not work? MENU = UP + DOWN SELECT = LEFT + RIGHT (or LEFT + RIGHT + DOWN) REWIND = LEFT + RIGHT + UP START = UP + DOWN + LEFT unless maybe that is for the wireless payload only? Whoa... I just learned there were 9 versions... and apparently I have the 4. Anyone know the capabilities of the physical ports from version to version? Edited February 16, 2022 by ulao Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.