telengard Posted March 12, 2023 Share Posted March 12, 2023 (edited) I'm using a Panasonic JU-455 disk drive along with a PHP1800 sidecar on my TI99/4a and would like to put the disk drive in some kind of housing rather than having everything exposed. I haven't had much luck finding anything that I could put it in. I do have a dual height Sun enclosure I use for my disk imaging, but it is MASSIVE (it has a power supply in it) and is 2 bays. I only need 1 bay and ideally it would not be so deep. I would just be plugging the cables in from the back (edge and 4 pin molex power). Any suggestions, including 3d printed options would be appreciated! Drive is very similar to this pic, my bezel is black. Edited March 12, 2023 by telengard Quote Link to comment Share on other sites More sharing options...
carlsson Posted March 16, 2023 Share Posted March 16, 2023 Many drives for the BBC Micro came in such enclosures. Quote Link to comment Share on other sites More sharing options...
carlsson Posted March 16, 2023 Share Posted March 16, 2023 Here is a 3D printer option: https://www.printables.com/model/108442-525-floppy-drive-case Quote Link to comment Share on other sites More sharing options...
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.