zChris Posted September 24, 2023 Share Posted September 24, 2023 (edited) This weekend i dabbled with some 3d modelling for 3d printing. Ive made front and back cover for the skunkboard (regular games works aswell, atleast cybermorph did) with and without USB. Its not anything fancy. In any case if someone want to print them themself they can be downloaded here https://github.com/zChris83/JaguarCartridge3D/tree/main . When printing the front it was printed face down and back up, that made the support structures abit annoying to remove from the bevel on the front (where the image goes). So it might be worth printing it face up instead and have the supports being added on the back. Tinkercad links: Jaguar Cartridge Lock - https://www.tinkercad.com/things/jSvEy18z9q5?sharecode=PACpEYa0ly_gMz7evEUwdmIzIX74dUkdsqh-D3Bq7ZE Ordinary back - https://www.tinkercad.com/things/85pVnfDs8SS?sharecode=CDI8oqdWMA0JpPI291lkEOzN3cRUV5vJYTlmnF-nMgs Skunkboard USB back - https://www.tinkercad.com/things/cMOQQS2EdR4?sharecode=lx6ExvdMDrB8edsTSshe4tGGn9rh7fnqBh8WE04SE_c Edited September 24, 2023 by zChris Added tinker links 3 4 Quote Link to comment Share on other sites More sharing options...
+cubanismo Posted March 8 Share Posted March 8 For some reason I completely missed this. Awesome! I'll have to give these a shot in my printer. Do you have any pictures of how it came out? Quote Link to comment Share on other sites More sharing options...
zChris Posted August 11 Author Share Posted August 11 I've made some updates today. Now there is a version with a hole on the back of the case with optional part to print and cover it. That was the easiest way to get a somewhat nice case for my skunkboard with usb ports since it didnt need supports and i could just glue the pieces together. 5 Quote Link to comment Share on other sites More sharing options...
+cubanismo Posted August 12 Share Posted August 12 Nice! What are the specs for the screws and filament you used? Quote Link to comment Share on other sites More sharing options...
+CyranoJ Posted August 12 Share Posted August 12 Shouldn't there be a hole for the USB cable you need to connect to the PC? Otherwise you have to unscrew it to flash/upload to it. Quote Link to comment Share on other sites More sharing options...
Editorb Posted August 13 Share Posted August 13 14 hours ago, CyranoJ said: Shouldn't there be a hole for the USB cable you need to connect to the PC? Otherwise you have to unscrew it to flash/upload to it. 2 Quote Link to comment Share on other sites More sharing options...
zChris Posted September 2 Author Share Posted September 2 (edited) On 8/13/2024 at 1:39 AM, CyranoJ said: Shouldn't there be a hole for the USB cable you need to connect to the PC? Otherwise you have to unscrew it to flash/upload to it. There is a hole on the side for USB cable. Edited September 2 by zChris Quote Link to comment Share on other sites More sharing options...
zChris Posted September 2 Author Share Posted September 2 On 8/12/2024 at 11:31 PM, cubanismo said: Nice! What are the specs for the screws and filament you used? The screws i took from another cart so not sure what format they are in. Used PLA filament. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.