bytebinge Posted December 19, 2023 Share Posted December 19, 2023 Installed this board. Have checked the wires many times and it seems correct. I get a black and white flipping image. Please help. Quote Link to comment Share on other sites More sharing options...
0 +-^CrossBow^- Posted December 19, 2023 Share Posted December 19, 2023 This would have been better in the hardware forum or the 8-bit forum, but I've always left the 4050 IC chip in place when adding the UAV to the 8-bit computers. The issue from that screen image looks to be a sync issue. So I can only suggest that you double check the connections on the socket side and verify the jumper settings are correct for the 800xl. I've only done this about 3 times into 800XLs but they were all NTSC and again, I left the 4050 in place when I did them so I've not seen this specific issue come up on any setups I've done. Quote Link to comment Share on other sites More sharing options...
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
Question
bytebinge
Installed this board. Have checked the wires many times and it seems correct. I get a black and white flipping image. Please help.
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.