Lifeguard Posted April 2, 2004 Share Posted April 2, 2004 I've got an Atari Black Widow that I'm having problems with. My brother and I recently got it working after replacing one of the main power capcitors. The problem is that when the spiders and bugs appear there is a faint line that follws them for the entire time they are on the screen. I'm sure something just needs adjusting (I hope) but I don't know where to start. Anyone have any suggestions or solutions I can try to fix this? Quote Link to comment Share on other sites More sharing options...
Cassidy Nolen Posted April 2, 2004 Share Posted April 2, 2004 Turn down the brightness on the monitor a bit. See if it goes away. If not, I would reseat the eproms on the PCB. I had a similar condition on my Star Wars cockpit, and I reseated the chips for the fix. HTH Cassidy Quote Link to comment Share on other sites More sharing options...
Max-T Posted April 5, 2004 Share Posted April 5, 2004 Is the line that follows brighter or darker than the background? I've heard that this can be a problem with vector monitors, but if the trouble only started after replacing a part outside of the monitor, there may be another culprit. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.