Jump to content
IGNORED

Help needed to fix non-op :-( SK ATARI 5200 multcart


H1HummerAlpha

Recommended Posts

Hi everyone,

Been following these forums for a long time. Now is our 1st post :-) We were doing the 8bit composite S Video mod. We use the multi cart for our testing. DEAD nothing just a black screen. We pulled out our common games: Centipede, Galaxian and Centipede and they all tested PERFECTLY!! The multi-cart is just plain dead. It's been in storage for about half a year. Works perfect then. Any help is greatly appreciated to resolve this! Setting up our game room and the multi-cart is a necessity. Game on.

 

William Fong & Sandy Lee :x

Link to comment
Share on other sites

Hi everyone,

Been following these forums for a long time. Now is our 1st post :-) We were doing the 8bit composite S Video mod. We use the multi cart for our testing. DEAD nothing just a black screen. We pulled out our common games: Centipede, Galaxian and Centipede and they all tested PERFECTLY!! The multi-cart is just plain dead. It's been in storage for about half a year. Works perfect then. Any help is greatly appreciated to resolve this! Setting up our game room and the multi-cart is a necessity. Game on.

 

William Fong & Sandy Lee :x

 

Hey, aren't you 80's kid on eBay? Welcome either way. :D

 

Sounds like one of the EPROM's has gone bad, is it the DIP switch version or the menu driven one?

Link to comment
Share on other sites

Hi yes we are those people on eBay :-)

 

I thought so. :D

 

Hi CPU WIZ. It's the menu driven version. We've finally caved in and am converting all of our old classic systems to composite audio S-video. What can we do to resolve this as we've been trying to touch base with Sean K for no avail :-( thanks

 

Yep, Sean is a tough guy to get a hold of, you should have probably showed up in San Jose for CGE and he may have fixed it for you. I have cracked one of the menu driven carts open before, they aren't exactly easy to fix if you don't have the contents of the EPROM in the first place. :(

Link to comment
Share on other sites

Yes the CGE Expo was very close to home BUT no time. I guess we'll wish for the best and hope Sean will contact us soon as we just found out today of its demise.

 

You could try to contact one of his close friends to get a hold of him, worth a shot. Good luck. :)

 

Or you could try to convince someone with a menu-driven cart to crack it open, de-solder the EPROM's and dump them. :ponder: Then do the same to your's and re-program them and solder them back in.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...