gdr117 Posted June 4, 2005 Share Posted June 4, 2005 Hi there, I just bought a pong system today (a Unisonic but I would assume this repair applies to all consoles) but the cord that goes into the TV is cut (see image). What would be the best way to repair this? Find a new plug and solder it on or replace the wire? I also attached a photo of the console side of the cord. Thanks for your help. Quote Link to comment Share on other sites More sharing options...
+batari Posted June 5, 2005 Share Posted June 5, 2005 Hi there,I just bought a pong system today (a Unisonic but I would assume this repair applies to all consoles) but the cord that goes into the TV is cut (see image). What would be the best way to repair this? Find a new plug and solder it on or replace the wire? I also attached a photo of the console side of the cord. Thanks for your help. 867960[/snapback] I'd just replace the whole cable. Looks like a garden variety RCA cable to me. It should pull right out of the console - it doesn't look soldered at all. I repaired a 2600 with a cut cable in exactly this fashion. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.