+DarkLord Posted September 18, 2005 Share Posted September 18, 2005 Guys, is there anything that needs to be adjusted to let telnet work with STing? I've got Rorys EtherNEC on the Mega ST running my BBS, and I can't telnet *in* at all - I always get a "connection refused". I can use CAB to access the 'Net with no problems. I can ping out, and from other comps on the LAN I can ping the Mega ST. So thats working. Any ideas? Thanks. Quote Link to comment Share on other sites More sharing options...
Paolo Posted September 18, 2005 Share Posted September 18, 2005 I think that you need to have some kind of authorization to allow incoming requests, like when you need an FTP server (or a sort of) to let people FTP in. Maybe this is something achievable through the Sting Config. file... Quote Link to comment Share on other sites More sharing options...
danwinslow Posted September 18, 2005 Share Posted September 18, 2005 (edited) Well, you'd need a telnet daemon/service of some sort. You are attempting to come in in on port 23 ( telnet ), but nothing is listening. Google for telnetd. *edit* er, assuming your BBS is not listening for telnet connects? If it is, make sure its on the standard port. Edited September 18, 2005 by danwinslow Quote Link to comment Share on other sites More sharing options...
+DarkLord Posted September 18, 2005 Author Share Posted September 18, 2005 Well, you'd need a telnet daemon/service of some sort. You are attempting to come in in on port 23 ( telnet ), but nothing is listening. Google for telnetd. *edit* er, assuming your BBS is not listening for telnet connects? If it is, make sure its on the standard port. 933904[/snapback] My bad guys. I thought the version of Express I changed to listened for telnet. It does not. Thats why there is no connection. Thanks for all the help and suggestions. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.