Jump to content
  • entries
    15
  • comment
    1
  • views
    12,163

About this blog

Videos I have published on Youtube describing the installation of AV mods, and other technology related to video gaming.

Entries in this blog

M.O.D.E. - Power LED as Access light - DC

Did a really quick little project last night. I'd been kicking this around in my head but decided to try it finally last night. The M.O.D.E. or Multi-Optical-Disc-Emulator from TerraOnion has a nifty set of additional pins along one side of it for adding in additional features. Among them are the ability to add in a wire for adding a physical reset button or button to simulate a Disc Swap process etc. One of the extra pins is for wiring in an additional LED in the system somewhere that is direct

-^CrossBow^-

-^CrossBow^-

Complete Roland MT-200 Basic Tutorial and Guide

In this 3 video series, I go over the basics and understanding of the Roland MT-200 sound module. It is an excellent multifunction sound module that can act as both a sequencer and sound module. This means that in addition to being a very nice general MIDI and Sound Canvas sound module, it also has the ability to record MIDI songs from the MIDI in port and save them to diskette to be played back in a standalone fashion later, making it a MIDI Jukebox as well! The first video goes over the basi

-^CrossBow^-

-^CrossBow^-

Roland MT-200: How to configure, install, and use a GoTEK Floppy Emulator

As some might know by now, I've got an MT-200 that I picked up over a month ago now. Really cool little device from Roland that was originally intended for use in teaching music. But these devices have the ability to play back midi files through built in disk drives that use IBM formatted 3.5 inch disks. They can also be used as sound modules and with modern day computers can still be made to be used with ScummVM and Dosbox for classic gaming. Anyway I was getting frustrated with my disks seemin

-^CrossBow^-

-^CrossBow^-

BK 1474 O'Scope Introduction

I am only a hobbyist and NOT an electrical engineer. As such I'm sure my terminology and explanations of things will be off or perhaps completely wrong. As such, please let me know in comments on such mistakes as it helps me and all others who might view this video to learn. With that, this is my basic intro to my BK 1474 O'scope that I got some time ago and some ways it can be used. This video is only meant for fun and not as instructional as most of my other videos are. Enjoy!

-^CrossBow^-

-^CrossBow^-

Intellivision - 2609 - Capacitor Replacement Video

Been doing a few composite AV mods on client intellivisions. Though I would video the process I go through for doing a capacitor replacement. I'm working on trying to get the videos down to be more watchable in smaller amounts of time but perhaps too much compression on time is used in this video?   Big special thanks to Adan Toledo for his permission to feature some of his music from the CollectorVision homebrew release of Sydney Hunter & the Sacred Tribe for the Intellivision!   - Orde

-^CrossBow^-

-^CrossBow^-

A genesis va3 Model 1 with proper DAC possible? Yes...yes it is. But....

So the other night I tackled a hardware upgrade that I had seen mentioned in a youtube video that seemed really interesting. It was a video where a another retro gamer and hardware modder was showing his latest modification using a Yamaha 3438 discreet synth chip to produce the music and sounds in place of the stock Yamaha 2612 that came with the model 1 genesis units. The advantage of doing this was that the 3438 was essentially pin compatible but featured a true 8-bit DAC within it and better

-^CrossBow^-

-^CrossBow^-

Lynx Model 2 - Capacitor Replacement

Just did a capacitor replacement on my Atari Lynx model 2 this weekend. One of my two units was suffering from some nasty audio clipping, distortion and overall low volume. The camera was on a lower quality shooting mode and I did realize until I was done with the filming. I apologize for that but you can still make out enough to get see the overall process and results afterwards.    

-^CrossBow^-

-^CrossBow^-

×
×
  • Create New...