flashjazzcat Posted February 11, 2012 Share Posted February 11, 2012 (edited) I hope so, for all our sakes... the machine in the picture re-yellowed within eighteen months of first being treated with peroxide. Edited February 11, 2012 by flashjazzcat Quote Link to comment Share on other sites More sharing options...
Ransom Posted February 11, 2012 Share Posted February 11, 2012 18 months...wow! I haven't been following this topic very closely for the last year or so. Is re-yellowing a common occurrence? Quote Link to comment Share on other sites More sharing options...
Keatah Posted February 11, 2012 Share Posted February 11, 2012 Is re-yellowing occuring with peroxide only? OR with everything else in the mixture too? Quote Link to comment Share on other sites More sharing options...
flashjazzcat Posted February 11, 2012 Share Posted February 11, 2012 I use pure creme peroxide, since I found Oxy makes the process too "brutal" and risks blooming. In any case, these XL cases and XE keyboards can easily be processed in a day providing there's decent sun, so I find no use for accelerants of any kind. As for frequency of re-yellowing: it seems to depend on the plastic (some XLs re-yellow faster than others), although I'd be inclined to suggest that peroxide treatment would tend to speed up subseqent yellowing if the plastic is not anti-UV treated. The XLs I'm restoring at the moment were all good as new after being cleaned up in 2010, and far from being left out in the sun on a table top, they had been stored in the shade on shelving. However, they steadily re-yellowed. The same thing happened with various XE keyboards I treated around the same time: some were kept in bubble-wrap in a box, and still emerged yellow. However, I'm getting good results with the PrintGuard spray. An XE I restored almost a year ago (case and keyboard were extensively discoloured) and treated with PrintGuard before depatch to the new owner is still (judging from recent photographs) in the same cosmetic condition it was in when I sold it. So - I think anti-UV treatment might be prudent. Quote Link to comment Share on other sites More sharing options...
Ransom Posted February 11, 2012 Share Posted February 11, 2012 Good to know. I have yet to try this, but some day I plan to treat my Platinum IIe. Hopefully I'll remember to also buy anti-UV spray. Quote Link to comment Share on other sites More sharing options...
flashjazzcat Posted February 11, 2012 Share Posted February 11, 2012 Well - don't let these concerns discourage you. This is still a great technique, and most things don't mind a second treatment once the propensity for re-yellowing has been evaluated. I can recommend PrintGuard, though: minimal change to the finish of the case, no greasiness, etc. Quote Link to comment Share on other sites More sharing options...
Ransom Posted February 12, 2012 Share Posted February 12, 2012 Oh, I won't let it discourage me. It's just the infrequency of sunlight that discourages me. But I'll keep PrintGuard in mind for when the time comes. 1 Quote Link to comment Share on other sites More sharing options...
Bryan Posted February 15, 2012 Share Posted February 15, 2012 Just found a nice "rain or shine" method. I have a 500W halogen work light from Home Depot. I think it was $20 or so. I took the UV glass out of the front of it and set it in the bathtub (metal tub, btw.. this might not be a good idea for composites- also, don't look at the bulb directly without the glass). I brushed on some Peroxide 30/Xanthan Gum mix and let it blast away, checking in for a turn and a rebrush every so often. It took about 2 hours to restore a fairly browned 800XL top. 1 Quote Link to comment Share on other sites More sharing options...
31336haxx0r Posted February 16, 2012 Share Posted February 16, 2012 Dude! Why didn't anyone think of that earlier! Halogen bulbs (and only those, not ordinary light bulbs!) emit quite a bit of UV. That's why they got a glass screen in front of them that filters the UV light. Thinking of that, did anyone ever try a "black light"? Quote Link to comment Share on other sites More sharing options...
Ransom Posted February 16, 2012 Share Posted February 16, 2012 Hmmm! This is starting to look like something I could actually do. Not in my (plastic) bathtub, but definitely in the basement. Get a halogen lamp, some peroxide cream, and some UV protectant spray and I could finally get some of my cases looking new! Quote Link to comment Share on other sites More sharing options...
flashjazzcat Posted February 16, 2012 Share Posted February 16, 2012 Great idea about the halogen lights. Here's a flash photo of a freshly Retr0Brited 130XE (with brand new badge) to show the finish resulting from the application of a coat of PrintGuard: Perhaps an iota shinier than the original case finish, but not obtrusively so. Quote Link to comment Share on other sites More sharing options...
Ransom Posted February 16, 2012 Share Posted February 16, 2012 Is the Print Guard you're talking about =1260&navTree[]=1378&navTree[]=761"]this one? Quote Link to comment Share on other sites More sharing options...
flashjazzcat Posted February 16, 2012 Share Posted February 16, 2012 (edited) Nope - I should have made it clear that I'm using Lyson Print Guard. That's a UK link, but you should be able to find it elsewhere. I can't speak for the results of any other brands. Maybe the one you've linked to is effectively the same. Edited February 16, 2012 by flashjazzcat Quote Link to comment Share on other sites More sharing options...
Ransom Posted February 16, 2012 Share Posted February 16, 2012 Hmm. Thanks for the clarification. If I Google "Lyson Print Guard," that's what comes up (the one I linked to originally), among others. It appears to be from the same company. The symbol is the same anyway. It's just smaller on the UK version. Or so it appears to me. But nowhere on the front of those cans does it say, "Lyson." Here's a place that claims that stuff is Lyson Print Guard. Maybe different packaging in the US? I may have to buy one and find out. Anyway, thanks again for the clarification that the brand is Lyson. Quote Link to comment Share on other sites More sharing options...
flashjazzcat Posted February 16, 2012 Share Posted February 16, 2012 If memory serves, the first time I started looking for Lyson PrintGuard, a tin with that design on the label came up, but it was from a US vendor. Perhaps Lyson's UK product line does indeed have different packaging, so you might be in luck with that one. It's not exactly cheap over here (£10-15 a tin), but it does last quite a while. Quote Link to comment Share on other sites More sharing options...
Ransom Posted February 17, 2012 Share Posted February 17, 2012 It's worth a try anyway, I suppose. Whenever I do try it, I'll post here. Of course the problem is we won't really know if it works for a long time. (Hopefully!) Quote Link to comment Share on other sites More sharing options...
w1k Posted February 23, 2012 Share Posted February 23, 2012 today i got nice 800xl what is default color on top? #fff? i want start cleaning in jun/july Quote Link to comment Share on other sites More sharing options...
flashjazzcat Posted February 23, 2012 Share Posted February 23, 2012 Looks like a good wash of the dismantled case in soapy water will bring that up just fine. The top isn't badly discoloured at all. Quote Link to comment Share on other sites More sharing options...
w1k Posted February 23, 2012 Share Posted February 23, 2012 ok, i will wash it todat with soape water in right under plastic is water bubbles only Quote Link to comment Share on other sites More sharing options...
flashjazzcat Posted February 26, 2012 Share Posted February 26, 2012 1084S-D1 Monitor: Before: After: 1 Quote Link to comment Share on other sites More sharing options...
Ransom Posted February 26, 2012 Share Posted February 26, 2012 Wow, that looks really great now! One thing I have trouble understanding is how to get it all to come out evenly. Does everyone use five or six light sources at once, so that every side is bathed in light? Or do you do one side at a time? And what about the crevices? It seems that if light is a critical component of the process, it would be very difficult to get it to come out even, unless you do it a single surface at a time. But that seems far too time-consuming, particularly with items that are shaped like that monitor, with its control panel area. Quote Link to comment Share on other sites More sharing options...
flashjazzcat Posted February 26, 2012 Share Posted February 26, 2012 (edited) Wow, that looks really great now! This is it reassembled and working with a VBXE 1200XL: The RGB wasn't working when I dismantled it and I was all ready with the soldering iron... but it somehow righted itself. Tube is super-sharp on this one, and colours extremely vibrant. It also gives the best Y/C picture of any CRT I own. All it required was a slight pincushion adjustment using a pot on the board. One thing I have trouble understanding is how to get it all to come out evenly. Does everyone use five or six light sources at once, so that every side is bathed in light? Or do you do one side at a time? And what about the crevices? It seems that if light is a critical component of the process, it would be very difficult to get it to come out even, unless you do it a single surface at a time. But that seems far too time-consuming, particularly with items that are shaped like that monitor, with its control panel area. It's not easy to get an even result, but this is usually because the discolouration tends not to occur evenly in the first place. If you look at this monitor in certain lights, you'll see that there's a trace of streaking on the front (where it was most severely discoloured), but I decided to call it a day when the chance of blooming, etc, outweighed the likelihood of further improvements. Indeed the objective, in a case like this, is not necessarily to achieve the original colour, but to achieve an even colour. Regarding light sources, naturally with a monitor, the bezel is easiest to position on a windowsill for exposure to the sun. In this case, the bezel also needed the most work. The back cover was in better shape, so I was content to coat it with perioxide and leave it on the bench not far from the window, where it could catch ambient light. It was thereafter a case of washing and recoating, gradually confining activity to the most stubborn areas, and repositioning parts near to the light source as appropriate. I'm becoming more partial to ambient light when Retr0Briting. I think the reaction is most balanced when the light source isn't too searingly intense. A slow reaction tends to produce better results than a fast one, especially when discolouration was severe. I'm never putting OXY into the mixture again (since the last job I tried it with bloomed badly). This monitor was done with pure 40 vol creme peroxide, and took a total of around eight hours in weak daylight. Edited February 26, 2012 by flashjazzcat 1 Quote Link to comment Share on other sites More sharing options...
Ransom Posted February 26, 2012 Share Posted February 26, 2012 It sounds as though there is something of an art to Retr0Briting. One of these days I'll give it a try. The latest 1200XL I purchased has a pretty good case, but it is yellowed enough that you can tell. Not terrible, but not very nice either. I disassembled it and then cleaned it up with soap and water. That got rid of the grime, but the yellow's still there. So it looks like I'll have to give the Retr0Briting a try. But, first, I have to get the modding done. Quote Link to comment Share on other sites More sharing options...
+wood_jl Posted February 27, 2012 Share Posted February 27, 2012 Somebody needs to test the effectiveness of the spray by treating a some white XL-equipment (say a 1030 you don't care about anymore), spraying it with the protective coating, and then deliberately hanging it out in the sun. I expect nothing would last that, but if you covered 1/3 to protect, sprayed 1/3 to test coating, and left 1/3 totally unprotected, it would make a nice experiment. Maybe a 1027 case would be good for this, no? This is a great thread! Thanks to all for this info. Quote Link to comment Share on other sites More sharing options...
flashjazzcat Posted February 27, 2012 Share Posted February 27, 2012 I have a 1010 which is ripe for the job (no pun intended). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.