rcamp48 Posted September 11, 2021 Share Posted September 11, 2021 17 hours ago, Amis said: I don’t recognize your handle or recall having seen you on my BBS’s or the other Atari boards each of us support daily. Have you been contributing to the Atari BBS’s on the list? What handle do you go by? Which of the boards do you call? I am actually The Master-SPy, and just started frequenting the Atari BBS's , I ran Spy Visits Spy BBS for years , just getting back into it, I have a tutorial for setting up Forem XE on either real hardware or on Altirra...... I used to call John Polka's boards quite a bit but with running a 16 node BBS under Christ Followers BBS for over 2 years, I have been busy. Still I intend to call more often..... Russ Quote Link to comment Share on other sites More sharing options...
rcamp48 Posted September 11, 2021 Share Posted September 11, 2021 I have the complete software package for Forem XE , all sorted out and online but only 1 caller at a time , I wonder if I could link it to 16 nodes on Wildcat, I wiull have to try it, it might involve running the modem on more than just port 1985, say posrts 1985 to 1995 for 10 nodes Quote Link to comment Share on other sites More sharing options...
Amis Posted September 12, 2021 Share Posted September 12, 2021 20 hours ago, rcamp48 said: I am actually The Master-SPy, and just started frequenting the Atari BBS's , I ran Spy Visits Spy BBS for years , just getting back into it, I have a tutorial for setting up Forem XE on either real hardware or on Altirra...... I used to call John Polka's boards quite a bit but with running a 16 node BBS under Christ Followers BBS for over 2 years, I have been busy. Still I intend to call more often..... Russ I think all of this is marketing. Not sure what your selling or for what reason, but i'm not buying it.. 1 Quote Link to comment Share on other sites More sharing options...
rcamp48 Posted September 12, 2021 Share Posted September 12, 2021 42 minutes ago, Amis said: I think all of this is marketing. Not sure what your selling or for what reason, but i'm not buying it.. Not selling anything, just working on Forem XE and making it available to all... working out the bugs in it and polishing it up. Forem_XE_Pro_5.4_Master_Disk_Updated_With_Docs.atr Quote Link to comment Share on other sites More sharing options...
rcamp48 Posted September 12, 2021 Share Posted September 12, 2021 There are too many Atari 8 Bit BBS's coming out with Fujinet and TNFS servers. What I am going to do instead is run a BBS that is strictly for the Atari Portfolio, you will be able to log onto the BBS with your Atari Portfolio and DIRECTLY download any of the 22,000 files onto your Atari Portfolio. In order for me to set it up I have to take all directories from my Atari Portfolio section and turn the files from each into atrs so that the Atari 8 Bit computer can read them. Forem XE will be customized to 7 or 8 line screens in ASCII, all screens will be set up this way. I will have a section in the Login prompts that offer Atari Portfolio as a choice of Atascii, ascii, ansi, etc and will automatically set everything up for you to download in xterm . One question: How many Atari Portfolio users are there out there that have wifi on their Atari Portfolio? Or should I offer a dial up line ? That means getting a real 850 interface, I have lots of 56K modems. Let me know what you think if you are an Atari Portfolio user. Quote Link to comment Share on other sites More sharing options...
rcamp48 Posted September 12, 2021 Share Posted September 12, 2021 I will be addressing the problem of unzipping files on the Atari Portfolio, since everything I store with the exception of a few files is zipped, it would be easy for me to customize Forem XE to first unzip the files to a temporary directory on the 8 bit Atari then allow the user to download the unzipped files directly to his/her memory card. This should not be too hard to do within Basic XE and will make things really good. I will provide the newer updated Forem XE as I update it. Russ Quote Link to comment Share on other sites More sharing options...
moonlight_mile Posted October 8, 2021 Share Posted October 8, 2021 Hey All, I was wondering if anyone has the original text files from FoReM XE 1.1? I have the files from FoReM 26m and XEP just wondering if anyone has a copy of the original Matt Singer XE (or Xl for that matter) text files. Thanks. Quote Link to comment Share on other sites More sharing options...
moonlight_mile Posted October 21, 2021 Share Posted October 21, 2021 TimeMachine set:1985Welcome to 1985! There is a brand new bbs program from Matt Singer. He calls it FoReM XE!It is fully customizable and very fast thanks to the new Basic XE language cart!Come and visit:FoReMXEBBS.ddns.netPort:9999————————————Yup I put up an old FoReM XE bbs for true nostalgia. It took a heroic effort by Amis to get it to work with Altirra but he got it working!My plan is to keep it as close to the Original as possible. We will be upgrading it as time goes on. Please be patient if there are any issues or errors. It was never meant to be run in the 21at century! Lol. Stop by and see what the state of the art bbs was in 1985!FoReMxebbs.ddns.net port:9999Welcome to 1985! 3 Quote Link to comment Share on other sites More sharing options...
+DarkLord Posted October 21, 2021 Share Posted October 21, 2021 If you had an adapter, would a WiModem 232 work with the portfolio? Very neat and compact - like the Portfolio itself. Quote Link to comment Share on other sites More sharing options...
rcamp48 Posted October 23, 2021 Share Posted October 23, 2021 On 10/21/2021 at 12:55 PM, DarkLord said: If you had an adapter, would a WiModem 232 work with the portfolio? Very neat and compact - like the Portfolio itself. Yes I have one and it works good on Forem XE Quote Link to comment Share on other sites More sharing options...
+DarkLord Posted October 23, 2021 Share Posted October 23, 2021 15 hours ago, rcamp48 said: Yes I have one and it works good on Forem XE Awesome. The compact size of the WiModem 232 goes well with the ultra compact theme of the Portfolio... Good stuff. Quote Link to comment Share on other sites More sharing options...
prysm1 Posted October 30, 2021 Share Posted October 30, 2021 is there a bbs to atariage forums gateway or something? Quote Link to comment Share on other sites More sharing options...
Tillek Posted October 30, 2021 Share Posted October 30, 2021 2 hours ago, prysm1 said: is there a bbs to atariage forums gateway or something? No. Honestly, part of the appeal of BBSs for many (if not most) of us is the different dynamic brought by the absence of the internet forum crowd. 5 Quote Link to comment Share on other sites More sharing options...
prysm1 Posted October 30, 2021 Share Posted October 30, 2021 7 minutes ago, Tillek said: No. Honestly, part of the appeal of BBSs for many (if not most) of us is the different dynamic brought by the absence of the internet forum crowd. ok, which ones are the most active to explore? also are there any MUDs that works with the Atari? 1 Quote Link to comment Share on other sites More sharing options...
+DarkLord Posted October 30, 2021 Share Posted October 30, 2021 Not sure about MUDs...but, Tillek maintains a current list of active to very active Atari (both 8bit and 16bit) BBS's. You can find it here: http://sfhqbbs.org/ataribbslist.php HTH's! 1 Quote Link to comment Share on other sites More sharing options...
Tillek Posted October 30, 2021 Share Posted October 30, 2021 3 hours ago, DarkLord said: Not sure about MUDs...but, Tillek maintains a current list of active to very active Atari (both 8bit and 16bit) BBS's. You can find it here: http://sfhqbbs.org/ataribbslist.php HTH's! I'll be updating that tonight as well. Need to list the new Forem XE one and (I apologize) the change to your port. Quote Link to comment Share on other sites More sharing options...
prysm1 Posted October 31, 2021 Share Posted October 31, 2021 cool thanks, i visited amis8 a couple of times. very cool. 1 Quote Link to comment Share on other sites More sharing options...
+DarkLord Posted October 31, 2021 Share Posted October 31, 2021 8 hours ago, Tillek said: I'll be updating that tonight as well. Need to list the new Forem XE one and (I apologize) the change to your port. Yeah, you really need to change that. I've not been able to logon to my own BBS in days... <rolls eyes> 1 Quote Link to comment Share on other sites More sharing options...
+DarkLord Posted October 31, 2021 Share Posted October 31, 2021 4 hours ago, prysm1 said: cool thanks, i visited amis8 a couple of times. very cool. It is, and they are! You really should visit as many as you can. You'll find some similarity but you'll also find that some are quite different overall. Vive la difference! Quote Link to comment Share on other sites More sharing options...
rcamp48 Posted November 2, 2021 Share Posted November 2, 2021 I should be uploading a working copy of Forem XE Pro in a few mins, I have working really hard to get it to work with Fujinet, I can get it to connect but only a ring detect. Quote Link to comment Share on other sites More sharing options...
JohnPolka Posted November 4, 2021 Share Posted November 4, 2021 On 11/1/2021 at 11:27 PM, rcamp48 said: I should be uploading a working non-working copy of Forem XE Pro in a few mins, I have working really hard to get it to work with Fujinet, I can get it to connect but only a ring detect. I fixed your post. -JP 6 Quote Link to comment Share on other sites More sharing options...
tschak909 Posted November 4, 2021 Share Posted November 4, 2021 16 minutes ago, JohnPolka said: I fixed your post. -JP Guys, it's rather important that you run the fujinet-flasher with the debug monitor enabled, so you can look for any debug messages from the FujiNet. -Thom Quote Link to comment Share on other sites More sharing options...
_The Doctor__ Posted November 21, 2021 Share Posted November 21, 2021 (edited) I have entered the labyrinth and went looking for a complete list of FujiNet smartmodem AT commands and can't find them... where are they buried? If there is a built in AT? or ATHELP or similar command, can someone take screens shots of them or capture them with the terminal buffer and put them in a use-able locatable place? found obscure info sprinkled here and there but no one go to source of at command and their other equivalents, trying read the documents is a bit of a where the heck is this piece, that piece and was it in this video snippet or that snippet, or hey there's this on the wicki, but... surely there is a secret handshake to get us into the manual or compendium of end user monolithic documentation. Edited November 21, 2021 by _The Doctor__ Quote Link to comment Share on other sites More sharing options...
Amis Posted November 21, 2021 Share Posted November 21, 2021 17 hours ago, _The Doctor__ said: I have entered the labyrinth and went looking for a complete list of FujiNet smartmodem AT commands and can't find them... where are they buried? If there is a built in AT? or ATHELP or similar command, can someone take screens shots of them or capture them with the terminal buffer and put them in a use-able locatable place? PDF of the AT? screen capture attached - FujiNet AT Commands fuji.pdf 2 1 Quote Link to comment Share on other sites More sharing options...
+bf2k+ Posted November 21, 2021 Share Posted November 21, 2021 Am I missing something or is there no ATASCII terminal mode in Fujinet? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.