BitMerge6502 Posted January 13, 2021 Share Posted January 13, 2021 I was planning on making the shell a little thicker so it prints cleaner without supports. I was also going to add a (unofficial) logo, &/or rainbow stripe. I can try to add a lip & incorporate "snap" clips for assembly. Thanks again for letting me utilize your design, I will post it on this thread once it is ready & I have a pretty print to show off :-) Quote Link to comment Share on other sites More sharing options...
ajacocks Posted February 5, 2021 Share Posted February 5, 2021 (edited) Thanks for your excellent work, amiman99. I printed it, and it came out very nicely, using supports for the rounded edges. There is an issue with the button layout, though, using the updated rev 0.9 PCB, in at least the right-side thumbstick layout. The fire buttons don't line up with the holes, with the holes being offset to the left and above the actual buttons: You can see the square white button caps, in the bottom right corners of the holes. Those are the tactile button caps that are listed in the BoM. I'll attempt to fix this, and remodel the case in Fusion 360. I'll share the results, of course. Are you OK with me posting the final files on GitHub, PrusaPrinters and Thingiverse? I always license GPLv3, so the results would be fully open source. I'll also publish the F360 source and .step files, for others to use. While I'm at it, the BoM needs a bit of correction, in that it is short one tactile switch, and doesn't include the recommended Sparkfun large tactile buttons. Thanks! - Alex Edited February 5, 2021 by ajacocks Add clarification on button alignment Quote Link to comment Share on other sites More sharing options...
ajacocks Posted February 7, 2021 Share Posted February 7, 2021 I completed my re-layout of the right-thumbstick version of the controller. @amiman99 let me know what your thoughts on me sharing my work. I re-drew the top, completely, in Fusion 360. Fusion 360 Model (Top) I fixed the button alignment issue, and changed the edges to chamfers, to print better. - Alex 1 Quote Link to comment Share on other sites More sharing options...
BitMerge6502 Posted February 9, 2021 Share Posted February 9, 2021 could someone please explian what the jumper functions are? I assume the 2x3 is a ICSP for programming the AtTiny85 (I used Arduino Uno as isp to program mine). Quote Link to comment Share on other sites More sharing options...
+DrVenkman Posted February 9, 2021 Share Posted February 9, 2021 3 hours ago, BitMerge6502 said: could someone please explian what the jumper functions are? I assume the 2x3 is a ICSP for programming the AtTiny85 (I used Arduino Uno as isp to program mine). One of them swaps the order of the Fire buttons (e.g., which of the two is the primary and which is the secondary fire button). Another one determines which button registers when you click down on the thumbstick. 1 Quote Link to comment Share on other sites More sharing options...
amiman99 Posted February 9, 2021 Share Posted February 9, 2021 On 2/6/2021 at 9:11 PM, ajacocks said: I completed my re-layout of the right-thumbstick version of the controller. @amiman99 let me know what your thoughts on me sharing my work. I re-drew the top, completely, in Fusion 360. Fusion 360 Model (Top) I fixed the button alignment issue, and changed the edges to chamfers, to print better. - Alex The link shows the bottom. 1 Quote Link to comment Share on other sites More sharing options...
ajacocks Posted February 12, 2021 Share Posted February 12, 2021 (edited) Here is an updated version, showing all the changes: Fusion 360 - 5200 SuperController I didn't re-model your number button caps or the start/pause/restart buttons, yet. They work fine, as is, and I haven't gotten to it. I did adjust the sizes of the cutouts a bit, and realigned the fire buttons, for the right-side thumbtack layout. I also changed the specified screws for some self-drilling plastic screws. Here are some renders, and a photo, as well. - Alex Edited February 12, 2021 by ajacocks Insert correct image 5 1 Quote Link to comment Share on other sites More sharing options...
ajacocks Posted February 12, 2021 Share Posted February 12, 2021 Here are the STLs, and the Fusion 360 drawing, should you want to modify it. The parts not included are @amiman99 originals. Thanks! - Alex 5200 joystick fire btn v6.step Case bottom v7.step Case Top v7.step Case v7.f3z 5200 joystick fire btn v6.f3z 4 1 Quote Link to comment Share on other sites More sharing options...
BitMerge6502 Posted February 12, 2021 Share Posted February 12, 2021 5 hours ago, ajacocks said: Here are the STLs, and the Fusion 360 drawing Could you please export these to actual .STL format? The models in the zip files are in .f3d format. I am using Blender which doesn't recognize them. It would be better to distribute them in a more universal format as well because some slicing programs, (like Cura), do not accept them either. Thanks. Quote Link to comment Share on other sites More sharing options...
ajacocks Posted February 13, 2021 Share Posted February 13, 2021 Oh, sorry; I included the .step files, and not the .stl files. You can probably import the STEP files to Blender, using a plugin, as well. I've attached the .stl files here, as well. - Alex Case bottom.stl Case top.stl Button cap.stl 2 1 Quote Link to comment Share on other sites More sharing options...
ajacocks Posted February 15, 2021 Share Posted February 15, 2021 Out of curiosity, do folks prefer the left-side thumb stick layout? If so, I can mirror this to that layout, and share that, too. I might also make the change that @amiman99 suggested, and extend the retaining tabs around most of the edges of the shell. - Alex 1 Quote Link to comment Share on other sites More sharing options...
+DrVenkman Posted February 16, 2021 Share Posted February 16, 2021 22 hours ago, ajacocks said: Out of curiosity, do folks prefer the left-side thumb stick layout? Take it for what it’s worth but when @MakerMatrix and I were building and selling controllers last year, left-stick versions outsold right-stick by about 4-to-1. 1 Quote Link to comment Share on other sites More sharing options...
ajacocks Posted February 16, 2021 Share Posted February 16, 2021 Thanks, @DrVenkman. Out of curiosity, are you planning to start selling them again? Yours looked pretty amazing. I’ll go back and mirror mine, and share them. - Alex 1 Quote Link to comment Share on other sites More sharing options...
+DrVenkman Posted February 16, 2021 Share Posted February 16, 2021 9 minutes ago, ajacocks said: Thanks, @DrVenkman. Out of curiosity, are you planning to start selling them again? Yours looked pretty amazing. I’ll go back and mirror mine, and share them. - Alex Still up in the air. We’ve talked about it since last spring/summer but COVID tossed all our personal lives into a blender and we just haven’t gotten things going again. Maybe later this year, hopefully. We will announce it here in the 5200 forum with a dedicated thread and probably a post in this one if we do. Quote Link to comment Share on other sites More sharing options...
MakerMatrix Posted February 16, 2021 Share Posted February 16, 2021 2 hours ago, DrVenkman said: Still up in the air. We’ve talked about it since last spring/summer but COVID tossed all our personal lives into a blender and we just haven’t gotten things going again. Maybe later this year, hopefully. We will announce it here in the 5200 forum with a dedicated thread and probably a post in this one if we do. Short answer yes on my end. Also kits. I shot some macro footage of me soldering a board together that I want to edit into a YT video, to help people DIY these. I have a number of plans, but little free time to execute them. 2 Quote Link to comment Share on other sites More sharing options...
ajacocks Posted February 16, 2021 Share Posted February 16, 2021 That's great to hear! I'm doing these updates of @amiman99's original design for those who wish to DIY their own controllers. I'd also be more than willing to assist the both of you, should you need CAD or 3D printing assistance. - Alex 1 Quote Link to comment Share on other sites More sharing options...
BitMerge6502 Posted February 17, 2021 Share Posted February 17, 2021 On 2/15/2021 at 11:31 AM, ajacocks said: Out of curiosity, do folks prefer the left-side thumb stick layout? - Alex I do prefer the left-side thumbstick. It feels more like a traditional controller. I would like a mirrored version. When I use 2600 joysticks, I do play right handed however. Quote Link to comment Share on other sites More sharing options...
BladeJunker Posted March 24, 2021 Share Posted March 24, 2021 I just playing catch up here, didn't realize how many people helped make this controller but thank you all for your efforts. I think it goes a long way to making the 5200 more accessible for more people, actually having people play the 5200 rather than mock it, avoid it, or rip out it's Pokey heh. Was just speculating on a new 5200 controller door flap and thought you could actually print an insert cradle for that alcove that fits this new controller. Imagine it being like those controller recharge stations except side to side rather than front to back. Do they fit inside with the door closed? If not these controllers inserting on top with a cradle would be a nice alternative to those without a door. Quote Link to comment Share on other sites More sharing options...
ajacocks Posted March 24, 2021 Share Posted March 24, 2021 Amusingly, I don't actually have a 5200, so I can't say if it would fit, or not. I built these controllers as a gift for a friend. If anyone has a spare functional 5200 that they would be willing to part with, I'd be happy to develop a mounting solution. - Alex Quote Link to comment Share on other sites More sharing options...
BladeJunker Posted March 25, 2021 Share Posted March 25, 2021 5 hours ago, ajacocks said: Amusingly, I don't actually have a 5200, so I can't say if it would fit, or not. I built these controllers as a gift for a friend. If anyone has a spare functional 5200 that they would be willing to part with, I'd be happy to develop a mounting solution. - Alex A lot people don't have the 5200, just crazy folks. I just got another console but it's spoken for if it works(as-is untested pile and such). See if I can measure the alcove maybe give you one surface, trying to get into print file making myself. Quote Link to comment Share on other sites More sharing options...
Aaron Spinks Posted April 29, 2021 Share Posted April 29, 2021 On 2/11/2021 at 10:42 PM, ajacocks said: Here is an updated version, showing all the changes: Fusion 360 - 5200 SuperController I didn't re-model your number button caps or the start/pause/restart buttons, yet. They work fine, as is, and I haven't gotten to it. I did adjust the sizes of the cutouts a bit, and realigned the fire buttons, for the right-side thumbtack layout. I also changed the specified screws for some self-drilling plastic screws. Here are some renders, and a photo, as well. - Alex Did you print this face down or vertically? I tried face down last night and the top was not glossy like yours came out. Quote Link to comment Share on other sites More sharing options...
ajacocks Posted April 29, 2021 Share Posted April 29, 2021 6 hours ago, Aaron Spinks said: Did you print this face down or vertically? I tried face down last night and the top was not glossy like yours came out. Aaron, I printed it face-down, on a textured PEI build surface. - Alex Quote Link to comment Share on other sites More sharing options...
Aaron Spinks Posted April 30, 2021 Share Posted April 30, 2021 On 4/29/2021 at 3:05 PM, ajacocks said: Aaron, I printed it face-down, on a textured PEI build surface. - Alex Thanks bud! Also did you ever mirror it for the thumbstick to be in the left side? I tried doing it with the files you uploaded but can't get it to work. Quote Link to comment Share on other sites More sharing options...
Aaron Spinks Posted May 1, 2021 Share Posted May 1, 2021 15 hours ago, Aaron Spinks said: Thanks bud! Also did you ever mirror it for the thumbstick to be in the left side? I tried doing it with the files you uploaded but can't get it to work. Disregard. I figured it out and made a few tweeks to it as well. Quote Link to comment Share on other sites More sharing options...
Aaron Spinks Posted May 3, 2021 Share Posted May 3, 2021 On 4/29/2021 at 3:05 PM, ajacocks said: Aaron, I printed it face-down, on a textured PEI build surface. - Alex Another question. So when I mirrored the thumb stick hole and fire buttons the fire buttons are not far enough over to the right. Do you have any suggestions on how to move this holes? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.