Bratwurst Posted February 13, 2021 Share Posted February 13, 2021 (edited) NOTICE: Please refer to the dedicated marketplace thread if you want to request one: The stick and buttons are clicky and have a good tactile feel for Chinese clone hardware. The button layout is such that I can lay my fingers over them like a traditional arcade control panel or use my thumb hugging the side like a gamepad. Rubber feet make it sturdy against a desktop or you can hold it in your lap. Done/shipped: joeatari1 -Buttons on left side, joystick on right side -shipped bydoempire -Buttons on left side, joystick on right side -shipped -^CrossBow^- -Joystick on left side, buttons on right side -shipped Gandor -Joystick on left side, buttons on right side -shipped hizzy - Buttons on left side, joystick on right side -skipped Oldschool80skid -Joystick on left side, buttons on right side -shipped TrekMD - Buttons on left side, joystick on right side -shipped JVersh - Joystick on left side, buttons on right side -shipped john_q_atari - Buttons on left side, joystick on right side -shipped mmervine - Buttons on left side, joystick on right side -shipped ZeroPage Homebrew -Joystick on left side, buttons on right side -shipped SledgeHammerD - Joystick on left side, buttons on right side -shipped Neogeoman - Joystick on left side, buttons on right side -shipped ZillaRUSH - Buttons on left side, joystick on right side -shipped If you're on the list please me know your preference: Edited April 16, 2021 by Bratwurst 12 2 Quote Link to comment Share on other sites More sharing options...
+Neon Wraith Posted February 13, 2021 Share Posted February 13, 2021 Looking good. You can put me down for one. I have one of your clicky Jaguar pads and I like that very much. Quote Link to comment Share on other sites More sharing options...
BydoEmpire Posted February 13, 2021 Share Posted February 13, 2021 They look pretty cool. I would love to get one... if the stick was on the right. Not sure if that's something possible to configure before you put them together. Quote Link to comment Share on other sites More sharing options...
Bratwurst Posted February 13, 2021 Author Share Posted February 13, 2021 7 minutes ago, BydoEmpire said: They look pretty cool. I would love to get one... if the stick was on the right. Not sure if that's something possible to configure before you put them together. I could easily mirror the pictured design in the first post. Made a template when I went to drill the holes so I'd get the spacing proper, that could be flipped around. 1 Quote Link to comment Share on other sites More sharing options...
BydoEmpire Posted February 13, 2021 Share Posted February 13, 2021 That's pretty cool, Bratwurst. IMHO there's a real lack of right-handed joysticks out there. 2 Quote Link to comment Share on other sites More sharing options...
+-^CrossBow^- Posted February 14, 2021 Share Posted February 14, 2021 I'm down for one! Quote Link to comment Share on other sites More sharing options...
Gandor Posted February 14, 2021 Share Posted February 14, 2021 Interested in one Quote Link to comment Share on other sites More sharing options...
Jinks Posted February 14, 2021 Share Posted February 14, 2021 That looks like a authentic 7800 arcade stick that Atari would have made 37 years ago. Quote Link to comment Share on other sites More sharing options...
hizzy Posted February 14, 2021 Share Posted February 14, 2021 I like it! Can I replace the buttons & stick with my own? 1 Quote Link to comment Share on other sites More sharing options...
Bratwurst Posted February 14, 2021 Author Share Posted February 14, 2021 20 minutes ago, hizzy said: I like it! Can I replace the buttons & stick with my own? I think so, but you'd have to verify the mount plate dimensions as I use a 3D printed harness to mount the stick. I might have to include a different harness or you might have to find a way to mount it yourself. The buttons are standard 24mm through-holes. Quote Link to comment Share on other sites More sharing options...
Oldschool80skid Posted February 14, 2021 Share Posted February 14, 2021 Please put me down for one. Thanks for making them available. Quote Link to comment Share on other sites More sharing options...
TrekMD Posted February 14, 2021 Share Posted February 14, 2021 That looks quite nice! I'll get one! Quote Link to comment Share on other sites More sharing options...
JVersh Posted February 14, 2021 Share Posted February 14, 2021 I am interested in one of these as well. Quote Link to comment Share on other sites More sharing options...
+ZeroPage Homebrew Posted February 14, 2021 Share Posted February 14, 2021 I would be interested in one or two of these! - James Quote Link to comment Share on other sites More sharing options...
john_q_atari Posted February 14, 2021 Share Posted February 14, 2021 I would love a right handed one, especially if I can just open it up and change restrictor plates or Sanwa compatible joysticks. Quote Link to comment Share on other sites More sharing options...
Zonie Posted February 15, 2021 Share Posted February 15, 2021 Would you be interested in selling just the enclosures? Those don't look like anything I've seen from the usual suppliers. Quote Link to comment Share on other sites More sharing options...
7800Knight Posted February 15, 2021 Share Posted February 15, 2021 Perhaps. It would be nice to have another controller in addition to the pack-in joystick and the NES-style joypad controller I have. Quote Link to comment Share on other sites More sharing options...
Bratwurst Posted February 15, 2021 Author Share Posted February 15, 2021 1 hour ago, Zonie said: Would you be interested in selling just the enclosures? Those don't look like anything I've seen from the usual suppliers. Certainly. I'll get in touch, I have a bunch of the enclosures. I've ordered materials to do a few more of these sticks and I'll reach out to people in the order that they expressed interest as I produce them, but be aware that it's going to be scheduled around my free time so don't expect anything overnight. 3 1 Quote Link to comment Share on other sites More sharing options...
SledgeHammerD Posted February 17, 2021 Share Posted February 17, 2021 Put me down for one as well. It would be handy for the 7800 and the 2600. 1 Quote Link to comment Share on other sites More sharing options...
mmervine Posted February 17, 2021 Share Posted February 17, 2021 I would be interested in one with the buttons on the left. Thanks! 1 Quote Link to comment Share on other sites More sharing options...
BydoEmpire Posted February 17, 2021 Share Posted February 17, 2021 On 2/13/2021 at 6:30 PM, Bratwurst said: I could easily mirror the pictured design in the first post. Made a template when I went to drill the holes so I'd get the spacing proper, that could be flipped around. Just in case it wasn't clear from my reply, definitely put me down for one w/ buttons on left/joystick on right as well if available. Quote Link to comment Share on other sites More sharing options...
Neogeoman Posted February 19, 2021 Share Posted February 19, 2021 Nice work, I'm down for one controller Quote Link to comment Share on other sites More sharing options...
Bratwurst Posted February 19, 2021 Author Share Posted February 19, 2021 On 2/17/2021 at 4:56 PM, BydoEmpire said: Just in case it wasn't clear from my reply, definitely put me down for one w/ buttons on left/joystick on right as well if available. I figured. Please see below: This good? I assume you'd want the arrangement to be right fire, left fire, joystick. But if you want left fire, right fire then joystick I can do that, just lemme know. 1 1 Quote Link to comment Share on other sites More sharing options...
ZillaRUSH Posted February 19, 2021 Share Posted February 19, 2021 I'll take one...stick on right/buttons left Quote Link to comment Share on other sites More sharing options...
BydoEmpire Posted February 19, 2021 Share Posted February 19, 2021 36 minutes ago, Bratwurst said: I figured. Please see below: This good? I assume you'd want the arrangement to be right fire, left fire, joystick. But if you want left fire, right fire then joystick I can do that, just lemme know. Awesome, that looks amazing. I don't really know if I have a strong preference so I'm fine either way, but if I can choose I'd probably rather have left fire, right fire, joystick. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.