Boris K. Posted January 15 Share Posted January 15 Does anybody here have experience with replacing these rubber screw covers on the Jaguar controller? I've found some rubber feet that could match, but I'd rather have them as flat as possible and thus closer to how the original was. Quote Link to comment Share on other sites More sharing options...
+BitJag Posted January 15 Share Posted January 15 It looks like these rubber feet are 3/8" in diameter and could be 1/16" or 1/8" thick (using royal measurements here since it seems like that was how they were originally measured). Here are some suggestions, please keep in mind I haven't tried any of these myself. 3M with adhesive 3/8" diameter 1/8" thickness - https://www.ebay.com/itm/254481693726, https://www.ebay.com/itm/254476778950 (a bit cheaper) Another option is to get a 3/8" diameter hole punch and a rubber sheet with adhisive. Finding a good thickness for the sheet of rubber seems to be a bit difficult but not impossible. Heavy duty 3/8" hole punch - link Rubber sheet with adhesive 1/16" thick - link 2 Quote Link to comment Share on other sites More sharing options...
Machine Posted January 15 Share Posted January 15 I think they are closer to 1/16" thick. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.