Mr Robot Posted November 10, 2021 Share Posted November 10, 2021 5 hours ago, Level42 said: Maybe PCBWay designed these themselves ? Or they give a rebate when allowed to put their name on them ? I don't know They are designed by users and shared on the pcbway site as a community service, there are lots of interesting projects on there. Including the OSS 4-in-1 cart that is currently popular. 6 hours ago, Faicuai said: Forgive my colorful language but... what a poorly designed cart-PCB that is... Among the worst I have seen! Has little to do with A8 carts... in facts, it appears as a general-use derivative card of another edge-type project. Ignoring the fancy art at the top the rest is a pig to make a case for Quote Link to comment Share on other sites More sharing options...
_The Doctor__ Posted November 10, 2021 Share Posted November 10, 2021 The cartridge shell could be a relief or embossed version across the entirety of the cart so It would still fit inside the 800 or 1200 tunnel and still be quite stylized... you don't need to tack a top on cart... just work in the cartridge dimensions and us some negative space... 2 Quote Link to comment Share on other sites More sharing options...
+Stephen Posted November 10, 2021 Share Posted November 10, 2021 2 hours ago, Mr Robot said: 9 hours ago, Faicuai said: Forgive my colorful language but... what a poorly designed cart-PCB that is... Among the worst I have seen! Has little to do with A8 carts... in facts, it appears as a general-use derivative card of another edge-type project. Ignoring the fancy art at the top the rest is a pig to make a case for It's not a 2600 cart as they only have 12 pins. This has 15 pins - why do you say it is not an A8 cart? Quote Link to comment Share on other sites More sharing options...
ivop Posted November 10, 2021 Share Posted November 10, 2021 On 11/9/2021 at 11:37 PM, Atari8guy said: How about this for the next project? (stolen from reddit) ? I'll tell you how I became the prince of a town called Tehran ? 1 4 Quote Link to comment Share on other sites More sharing options...
Mr Robot Posted November 10, 2021 Share Posted November 10, 2021 29 minutes ago, Stephen said: It's not a 2600 cart as they only have 12 pins. This has 15 pins - why do you say it is not an A8 cart? I didn't say it's not an A8 cart, in fact it's listed _as_ an a8 cart! I just said its difficult to make a case for carts like that. Quote Link to comment Share on other sites More sharing options...
Mr Robot Posted November 10, 2021 Share Posted November 10, 2021 2 hours ago, _The Doctor__ said: The cartridge could be a relief or embossed version across the entirety of the cart so It would still fit inside the 800 or 1200 tunnel and still be quite stylized... you don't need to tack a top on cart... just work in the cartridge dimensions and us some negative space... Probably better to use a readily available injection moulded cart shell. No one's going to pay for a custom injection moulded case and a 3d printed one is inferior in many ways. it would raise the cost and reduce the quality. 2 Quote Link to comment Share on other sites More sharing options...
_The Doctor__ Posted November 10, 2021 Share Posted November 10, 2021 so a search of already made distinctive housings that could be repurposed as cartridge shells then? Quote Link to comment Share on other sites More sharing options...
rensoup Posted November 10, 2021 Author Share Posted November 10, 2021 I can see you all love that idea of a custom cart shape ? Like I said it could be a dumb idea but I would at least like to find out for sure, and it would be shaped to fit within the dimensions of a regular cart shell (and would require a custom PCB but let's not get carried away). The PCBWay stuff is not what I had in mind but it's still interesting to see. As for saving, it's obviously not standard (and would take too much code space) so I'll just keep the cheat code. 1 Quote Link to comment Share on other sites More sharing options...
Wrathchild Posted November 11, 2021 Share Posted November 11, 2021 Couldn't the 3D printing guys come up with something that clips (glue if you were brave enough to.make it permanent) to the top of existing casings? Quote Link to comment Share on other sites More sharing options...
Mr Robot Posted November 11, 2021 Share Posted November 11, 2021 3 hours ago, Wrathchild said: Couldn't the 3D printing guys come up with something that clips (glue if you were brave enough to.make it permanent) to the top of existing casings? Prince of Persia Cart - Turban Edition? 3 Quote Link to comment Share on other sites More sharing options...
carlsson Posted November 11, 2021 Share Posted November 11, 2021 How a pico sized projector that draws power from the cartridge port and projects an image of the prince either into the roof (130XE) or into your face (800XL)? That would really be a special cartridge everyone talks about. 1 7 Quote Link to comment Share on other sites More sharing options...
pseudografx Posted November 11, 2021 Share Posted November 11, 2021 4 hours ago, carlsson said: How a pico sized projector that draws power from the cartridge port and projects an image of the prince either into the roof (130XE) or into your face (800XL)? That would really be a special cartridge everyone talks about. Why thinking so small, let's make the projector holographic! 2 5 Quote Link to comment Share on other sites More sharing options...
Beeblebrox Posted November 11, 2021 Share Posted November 11, 2021 Heh heh here's what 5mins and no skill gets ya - just for a laugh: 3 9 Quote Link to comment Share on other sites More sharing options...
carlsson Posted November 12, 2021 Share Posted November 12, 2021 I suppose manufacturing a custom joystick where the shaft is shaped like the prince (compare with the Bart Simpson joystick) would be too expensive. Even just making the grip in order to use it with a Wico Three Way (to which extent those even are popular) probably is costly. Over at the HSC, some of the players have found that a modified Genesis gamepad is more usable than a traditional joystick. That might be a cheaper option, to source a decent Atari friendly gamepad with PoP print and/or shape if you would make a smaller commercial run (assuming you get the rights to using the artwork etc). 1 Quote Link to comment Share on other sites More sharing options...
Mr Robot Posted November 12, 2021 Share Posted November 12, 2021 Can't we just put a toy mouse in the box? Maybe a rubber poo to fling? 3 Quote Link to comment Share on other sites More sharing options...
Peruchi Posted November 12, 2021 Share Posted November 12, 2021 1 hour ago, Mr Robot said: Can't we just put a toy mouse in the box? Maybe a rubber poo to fling? I like the poo idea, I guess it would match the brown color of my XL keyboard! ?? 1 1 Quote Link to comment Share on other sites More sharing options...
Leono Posted November 12, 2021 Share Posted November 12, 2021 @rensoup Yandex Museum of retro computers here, we're gathering a video conference with Jordan and author of another PoP port for another machine, and wanted to invite you as well. Please check your PM. 9 Quote Link to comment Share on other sites More sharing options...
rensoup Posted November 13, 2021 Author Share Posted November 13, 2021 7 hours ago, Leono said: @rensoup Yandex Museum of retro computers here, we're gathering a video conference with Jordan and author of another PoP port for another machine, and wanted to invite you as well. Please check your PM. That'd be crazy, not sure I'd have much to say though? 3 Quote Link to comment Share on other sites More sharing options...
Level42 Posted November 14, 2021 Share Posted November 14, 2021 On 11/11/2021 at 12:48 AM, rensoup said: As for saving, it's obviously not standard (and would take too much code space) so I'll just keep the cheat code. OK I give up.Where are those cheat codes ? I do hope those are level codes, not "no dying" codes....? Quote Link to comment Share on other sites More sharing options...
Level42 Posted November 14, 2021 Share Posted November 14, 2021 On 11/12/2021 at 2:15 PM, Peruchi said: I like the poo idea, I guess it would match the brown color of my XL keyboard! ?? XL keyboards are black. Quote Link to comment Share on other sites More sharing options...
+MrFish Posted November 14, 2021 Share Posted November 14, 2021 30 minutes ago, Level42 said: XL keyboards are black. Since when? 2 Quote Link to comment Share on other sites More sharing options...
Level42 Posted November 14, 2021 Share Posted November 14, 2021 17 minutes ago, MrFish said: Since when? UUuuuhhhh, since they were built ? Quote Link to comment Share on other sites More sharing options...
+MrFish Posted November 14, 2021 Share Posted November 14, 2021 1 hour ago, Level42 said: UUuuuhhhh, since they were built ? Serious?? Take a picture of one in bright light. 3 Quote Link to comment Share on other sites More sharing options...
leech Posted November 15, 2021 Share Posted November 15, 2021 1 hour ago, MrFish said: Serious?? Take a picture of one in bright light. Ha, yeah they have always been a dark brown I thought. 2 Quote Link to comment Share on other sites More sharing options...
rensoup Posted November 15, 2021 Author Share Posted November 15, 2021 5 hours ago, Level42 said: OK I give up.Where are those cheat codes ? I do hope those are level codes, not "no dying" codes....? Patience, there may be one more release... 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.