Bratwurst Posted April 16, 2021 Share Posted April 16, 2021 (edited) Send me a private message to specify whatever you might be interested in along with your zipcode or country if you are outside of the USA so I can quote you a total with shipping. Atari Jaguar D-Pad upgrade for 3-button and 6-button controllers, $8 for thin type, $9 for thick type: These pieces replace the OEM D-Pad in Atari Jaguar controllers, new d-pad or thumbstick available in either red or black. For all 6-button (and most 3-button) controllers you want the thin style pieces but the 3-buttons sometimes require the thick style. See images above. These dramatically improve play control and make inputting directions comfortable and easier. This isn't hyperbole, see this thread for more details and user feedback: https://atariage.com/forums/topic/320157-revising-the-jaguar-controller-d-pad/ Atari 7800 joysticks also compatible with the 2600, $55: 7800 joysticks I assemble on demand. The stick and buttons are clicky and have a good tactile feel for Chinese clone hardware, these sticks will also work on the 2600. The button layout is such that I can lay my fingers over them like a traditional arcade control panel or use my thumb hugging the side like a gamepad. Rubber feet make it sturdy against a desktop or you can hold it in your lap. Specify if you want left or right hand configuration. You can read more about these in this thread: https://atariage.com/forums/topic/317141-interest-check-for-a-run-of-7800-joysticks/ Edited September 24, 2021 by Bratwurst 10 Quote Link to comment Share on other sites More sharing options...
eddhell Posted April 17, 2021 Share Posted April 17, 2021 Do these work like ProLine sticks? Both buttons are fire in 2600 mode? this doesn't affect my appreciation for any controller better than the Pain-Line... The casing shell looks very nice and match well with the 7800, were these custom ordered? Quote Link to comment Share on other sites More sharing options...
schnuth Posted April 17, 2021 Share Posted April 17, 2021 These look pretty sweet, nice work! What are the dimensions of the stick? Quote Link to comment Share on other sites More sharing options...
Bratwurst Posted April 17, 2021 Author Share Posted April 17, 2021 5 hours ago, eddhell said: Do these work like ProLine sticks? Both buttons are fire in 2600 mode? this doesn't affect my appreciation for any controller better than the Pain-Line... The casing shell looks very nice and match well with the 7800, were these custom ordered? Correct, they're wired just like ProLines and work as expected in 2600 mode. They originally came in beige but in order to get them in black I had to order a substantial number, so they are kind of exclusive. 4 hours ago, schnuth said: These look pretty sweet, nice work! What are the dimensions of the stick? The enclosures are about 7.75" wide, 5.75" deep, with a height of 3" sloping down to 1.75" at the lowest point. The plastic is pretty thick which makes these very durable cases, really intended for industrial applications. Quote Link to comment Share on other sites More sharing options...
+Starwander Posted April 17, 2021 Share Posted April 17, 2021 Highly recommend these, they are well built. Quote Link to comment Share on other sites More sharing options...
eddhell Posted April 17, 2021 Share Posted April 17, 2021 (edited) oh yeah, how long is the cable? over 6 feet at least? can you add length or are they pre-made? go ahead an mark me down for one - if it works on 2600 should work with Amiga, C-64 and A800 computers as well (I would have killed for this back in the day) Edited April 17, 2021 by eddhell Quote Link to comment Share on other sites More sharing options...
eddhell Posted April 17, 2021 Share Posted April 17, 2021 (edited) Maybe I can finally figure out Desert Falcon - thought the damn cartridge was messed up for years until I read a copy of the manual and realized each button on 7800 could have separate functions...and then it was impossible to use second side button effectively due to the Pain-Line controller...(although only seems a few utilize this feature) Edited April 17, 2021 by eddhell Quote Link to comment Share on other sites More sharing options...
Bratwurst Posted April 17, 2021 Author Share Posted April 17, 2021 11 minutes ago, eddhell said: oh yeah, how long is the cable? over 6 feet at least? can you add length or are they pre-made? The cables are sourced from Hong Kong and they're all made in that "1.8 meter" length which comes to 5.9 feet. I'd have preferred them to be longer too of course but when you start talking about custom orders they have to be done in very large quantities. Fortunately, 9-pin extenders are cheap and plentiful as an alternative. Quote Link to comment Share on other sites More sharing options...
SoundGammon Posted April 17, 2021 Share Posted April 17, 2021 I'm out here in left field so I'll throw back this request: Is it possible to just by a case? I have a few Wico controllers that I would like to put in this along with a couple of leaf switches! Quote Link to comment Share on other sites More sharing options...
Bratwurst Posted April 17, 2021 Author Share Posted April 17, 2021 4 hours ago, SoundGammon said: I'm out here in left field so I'll throw back this request: Is it possible to just by a case? I have a few Wico controllers that I would like to put in this along with a couple of leaf switches! Certainly, I will send you a PM. Quote Link to comment Share on other sites More sharing options...
mmervine Posted May 7, 2021 Share Posted May 7, 2021 Bratwurst has now made me two of these. This joystick will totally change your 7800 experience. I had him make me ones with the buttons on the left as that seems the most natural to me. Great service and an all around great experience! 2 Quote Link to comment Share on other sites More sharing options...
Oldschool80skid Posted May 7, 2021 Share Posted May 7, 2021 (edited) I purchased one from his first run. Awesome controller. They are worth every penny and quite a bargain. @Bratwurst It would be cool to post units sold to date in your first post. P.S. I love all the support and new products that the community of Atariage have been giving this great console. Edited May 7, 2021 by Oldschool80skid 2 Quote Link to comment Share on other sites More sharing options...
Bratwurst Posted May 8, 2021 Author Share Posted May 8, 2021 I've probably shipped out 35 to 40 of the Joysticks at this point. Quote Link to comment Share on other sites More sharing options...
Bratwurst Posted July 26, 2021 Author Share Posted July 26, 2021 Bump, new things for sale, check 'em out!! Quote Link to comment Share on other sites More sharing options...
Bratwurst Posted September 15, 2021 Author Share Posted September 15, 2021 (edited) Bump! I stocked up with another round of materials for the 7800/2600 Atari joysticks. Edited September 15, 2021 by Bratwurst 1 Quote Link to comment Share on other sites More sharing options...
+Karl G Posted September 24, 2021 Share Posted September 24, 2021 I am interested in ordering two of the 7800 controllers with the wood grain look. Quote Link to comment Share on other sites More sharing options...
Bratwurst Posted September 24, 2021 Author Share Posted September 24, 2021 At the moment I just have one available, pre-built, but I have more wood veneer coming in a week or so and would be able to make you two. You want the sticks on the left hand side or right hand side? Quote Link to comment Share on other sites More sharing options...
+Karl G Posted September 26, 2021 Share Posted September 26, 2021 On 9/24/2021 at 12:06 PM, Bratwurst said: At the moment I just have one available, pre-built, but I have more wood veneer coming in a week or so and would be able to make you two. You want the sticks on the left hand side or right hand side? Both on the right side, please. 1 Quote Link to comment Share on other sites More sharing options...
SINGLE TOOTH Posted October 28, 2021 Share Posted October 28, 2021 Do you still have the 7800 controllers? Quote Link to comment Share on other sites More sharing options...
Bratwurst Posted October 28, 2021 Author Share Posted October 28, 2021 6 hours ago, SINGLE TOOTH said: Do you still have the 7800 controllers? Sure do, I'll send you a PM. Quote Link to comment Share on other sites More sharing options...
Rob_OTrron Posted January 9, 2022 Share Posted January 9, 2022 Would I be able to put in an order for 7800 controllers? Quote Link to comment Share on other sites More sharing options...
Bratwurst Posted January 9, 2022 Author Share Posted January 9, 2022 3 hours ago, Rob_OTrron said: Would I be able to put in an order for 7800 controllers? I will send you a PM, I can still make these. Quote Link to comment Share on other sites More sharing options...
Silver Back Posted January 10, 2022 Share Posted January 10, 2022 Do you sell these 7800 arcade sticks on eBay too? I bought one off eBay back in November and it looks almost exactly the same. Just curious. Quote Link to comment Share on other sites More sharing options...
Bratwurst Posted January 10, 2022 Author Share Posted January 10, 2022 23 minutes ago, Silver Back said: Do you sell these 7800 arcade sticks on eBay too? I bought one off eBay back in November and it looks almost exactly the same. Just curious. Yes, more than likely. 1 Quote Link to comment Share on other sites More sharing options...
Silver Back Posted January 10, 2022 Share Posted January 10, 2022 Oh okay I was just curious. To anybody considering these; they are quality joysticks and if your a fan of 7800 arcade ports, I’d go as far to say that these are a must! Great work. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.