Irgendwer Posted November 14, 2017 Author Share Posted November 14, 2017 (edited) I would like a print head and roller. What is the price? Sorry, the order stage is already over. You can find the prices in my first post, but since I ordered no spare parts I cannot make you an offer. Maybe someone of the ones who haven't paid yet isn't interested any more - you could then chime in. Here the list of affected users: atarian63 jacobus GlowingGhoul 8bitbill Atari800Xl panama800 Umberto (missing payment for one roller) Please settle the score! Edited November 14, 2017 by Irgendwer Quote Link to comment https://forums.atariage.com/topic/271589-revive1027-order-thread/page/3/#findComment-3890358 Share on other sites More sharing options...
Irgendwer Posted November 18, 2017 Author Share Posted November 18, 2017 Currently I'm preparing shipment. I'm missing the addresses of: gilsaluki jvas KLund1 DavidMil malan23 Brentarian Like instructed there, please answer in the personal conversation! And again the list of missing funds: atarian63jacobusGlowingGhoul8bitbillAtari800Xlpanama800 Please answer also if your have lost interest. Two users are on the waiting list. EU/CH orders will be send on Monday. Most of US/CAN mid of the week. I have some trouble with the 3D manufacturer (poor quality due to inappropriate packaging - awaiting a compensation delivery). Sorry for the delay! 1 Quote Link to comment https://forums.atariage.com/topic/271589-revive1027-order-thread/page/3/#findComment-3893175 Share on other sites More sharing options...
gilsaluki Posted November 19, 2017 Share Posted November 19, 2017 PM'd address. I am ready! Quote Link to comment https://forums.atariage.com/topic/271589-revive1027-order-thread/page/3/#findComment-3893798 Share on other sites More sharing options...
+Philsan Posted November 22, 2017 Share Posted November 22, 2017 Rubbers and ink rollers landed in Switzerland, thank you Christian! 2 Quote Link to comment https://forums.atariage.com/topic/271589-revive1027-order-thread/page/3/#findComment-3896034 Share on other sites More sharing options...
Irgendwer Posted November 24, 2017 Author Share Posted November 24, 2017 one of each please! I'm still not able to reach you. Please contact me/clean your personal in-box. Quote Link to comment https://forums.atariage.com/topic/271589-revive1027-order-thread/page/3/#findComment-3896825 Share on other sites More sharing options...
Irgendwer Posted November 24, 2017 Author Share Posted November 24, 2017 Please add me one rubber one roller Payment still not received yet. Quote Link to comment https://forums.atariage.com/topic/271589-revive1027-order-thread/page/3/#findComment-3896829 Share on other sites More sharing options...
Irgendwer Posted November 24, 2017 Author Share Posted November 24, 2017 I'll take 3 rubber print heads and 5 ink rollers. Payment still not received yet. Quote Link to comment https://forums.atariage.com/topic/271589-revive1027-order-thread/page/3/#findComment-3896831 Share on other sites More sharing options...
Irgendwer Posted November 24, 2017 Author Share Posted November 24, 2017 Put me down for 1 rubber and 1 roller. Thank you. Payment still not received yet. Quote Link to comment https://forums.atariage.com/topic/271589-revive1027-order-thread/page/3/#findComment-3896833 Share on other sites More sharing options...
Irgendwer Posted November 24, 2017 Author Share Posted November 24, 2017 I'll take 2 Print Heads, and 2 Rollers. Please let me know when they will be ready.. Payment still not received yet. Quote Link to comment https://forums.atariage.com/topic/271589-revive1027-order-thread/page/3/#findComment-3896834 Share on other sites More sharing options...
Irgendwer Posted November 24, 2017 Author Share Posted November 24, 2017 Woohoo at last. I will take 2 print heads an one ink roller. Payment still not received yet. Quote Link to comment https://forums.atariage.com/topic/271589-revive1027-order-thread/page/3/#findComment-3896835 Share on other sites More sharing options...
Irgendwer Posted November 24, 2017 Author Share Posted November 24, 2017 Please put me down for two printhead replacements and one ink roller. And, thank you for doing this. Michael I need your shipping address. Quote Link to comment https://forums.atariage.com/topic/271589-revive1027-order-thread/page/3/#findComment-3896839 Share on other sites More sharing options...
Irgendwer Posted November 24, 2017 Author Share Posted November 24, 2017 Sorry for all the noise here, but I'm trying to finish the orders. Since I haven't reached the users above, I try if the "response notification" of their posts will stop their hibernation. To all others: Orders are sent. Quote Link to comment https://forums.atariage.com/topic/271589-revive1027-order-thread/page/3/#findComment-3896841 Share on other sites More sharing options...
Mathy Posted November 24, 2017 Share Posted November 24, 2017 Hello Christian Thanks. The package was delivered yesterday. Sincerely Mathy Quote Link to comment https://forums.atariage.com/topic/271589-revive1027-order-thread/page/3/#findComment-3896865 Share on other sites More sharing options...
jvas Posted November 25, 2017 Share Posted November 25, 2017 Please be very careful with the fitting. I highly recommend to remove the front and upper parts of the case. There are parts of the old rubber, that can stuck below the wheel, which cannot be seen/removed from the top. 1 Quote Link to comment https://forums.atariage.com/topic/271589-revive1027-order-thread/page/3/#findComment-3897881 Share on other sites More sharing options...
Irgendwer Posted November 25, 2017 Author Share Posted November 25, 2017 http://atariage.com/forums/topic/261022-bringing-the-1027-printer-back-from-the-dead/page-6?do=findComment&comment=3882361 Be very sure you haven't any debris stuck below the drum! If the resistance turning the wheel forward rises, turn it back (like described in the manual) and check again! Quote Link to comment https://forums.atariage.com/topic/271589-revive1027-order-thread/page/3/#findComment-3897926 Share on other sites More sharing options...
Bill Lange Posted November 29, 2017 Share Posted November 29, 2017 Parts arrived in New Jersey. Testing from Atari BASIC Testing from Atariwriter Some random thoughts Wear rubber gloves if you have them. Take your time. I ordered two "type wheels" and I broke the first one because ... Make sure you really clean out the first and last track where the little screws are. Mine had debris in there that I could not see. After breaking the first 'type wheel', I cleaned them with alcohol/q-tip, scrapped each track with a small flat head screw driver then blow it out with compressed air [repeated this about four times to make sure those two tracks were really clean. Capital 'W' always looks like a small 'w'. The longer I let it print, it would get slightly better, but also there were totally bad rows of print ... probably a printer issue, not 'type wheel' issue. I could certainly adjust the little screws, try different paper and attempt to push the 'type wheel' into the tracks more to try to get better quality. Make sure you put the little strip that holds the 'type wheel' down on the correct way. The groves face out so they can get past the 'comb' that keep the tracks aligned. It works. Its not perfect. Its nice to see the 1027 printing again. Thank you Christian. 8 Quote Link to comment https://forums.atariage.com/topic/271589-revive1027-order-thread/page/3/#findComment-3900108 Share on other sites More sharing options...
Irgendwer Posted November 29, 2017 Author Share Posted November 29, 2017 Some random thoughts ... Thanks a lot for your valuable feedback! Sorry to hear that you lost one rubber - hopefully this increases at least the awareness of others. * I pretty sure you can improve the output by pressing the rubber into the grooves of the barrel to reduce the streaks and shadows. (The barrel should be cleaned very well indeed. I used a bristle brush to wipe all junk out of the grooves.) * The "bad rows" are often an indication of a printer problem: Not electrical but mechanical. Like written in the manual (Page 8/9) debris often bended the paper guide tongues which leads to a reduced motion of the print head and letter misalignment. Too much friction of the axis can also be the reason, as the horizontal position is of the same importance for the correct letter like the vertical one... I am glad you enjoy my development anyway! 3 Quote Link to comment https://forums.atariage.com/topic/271589-revive1027-order-thread/page/3/#findComment-3900632 Share on other sites More sharing options...
Irgendwer Posted November 30, 2017 Author Share Posted November 30, 2017 (edited) Time for a little status update: I'm still missing payment from: atarian63jacobus (contact recently established)8bitbillAtari800Xlpanama800 Haven't got the shipping address from: GlowingGhoul I guess it's OK if I start selling the ordered parts to the users on the waiting list on a "first come - first serve" basis and do not wait any longer for the users on the first list after next weekend? This chase is no fun and takes too much time from developments. I think about black listing the users for future projects. What do you think? Edited November 30, 2017 by Irgendwer Quote Link to comment https://forums.atariage.com/topic/271589-revive1027-order-thread/page/3/#findComment-3901024 Share on other sites More sharing options...
DavidMil Posted November 30, 2017 Share Posted November 30, 2017 Looking at some of the pictures of the test prints has caused me to wonder if the ink roller is getting too much ink on the printhead? When I get mine, if it does the same thing I may mess around with the ink roller and see what happens. I'll let you know as soon as I can. DavidMil Quote Link to comment https://forums.atariage.com/topic/271589-revive1027-order-thread/page/3/#findComment-3901318 Share on other sites More sharing options...
Irgendwer Posted December 7, 2017 Author Share Posted December 7, 2017 Final status update and payment reminder: I'm still missing payment from: atarian63Atari800Xlpanama800 Haven't got the shipping address from: GlowingGhoul BR I. Quote Link to comment https://forums.atariage.com/topic/271589-revive1027-order-thread/page/3/#findComment-3906348 Share on other sites More sharing options...
_The Doctor__ Posted December 7, 2017 Share Posted December 7, 2017 Platen may be to close to the head, or the head is to close to the platen.. only other problem might be material too soft or height or raised letter just a tad short.... otherwise looks pretty darn excellent... Quote Link to comment https://forums.atariage.com/topic/271589-revive1027-order-thread/page/3/#findComment-3906555 Share on other sites More sharing options...
Irgendwer Posted December 7, 2017 Author Share Posted December 7, 2017 Platen may be to close to the head, or the head is to close to the platen.. only other problem might be material too soft or height or raised letter just a tad short.... otherwise looks pretty darn excellent... A common problem is the used paper (too thick one). Normal copy paper is thicker than typewriter paper (at least here in Germany) and since the stamp pressure comes from the back of the paper too thick and inflexible paper results in smeary prints. Quote Link to comment https://forums.atariage.com/topic/271589-revive1027-order-thread/page/3/#findComment-3906574 Share on other sites More sharing options...
DavidMil Posted December 12, 2017 Share Posted December 12, 2017 My order arrived in the mail today. I'll put it in tonight and try it out. My thanks again Chris! DavidMil Quote Link to comment https://forums.atariage.com/topic/271589-revive1027-order-thread/page/3/#findComment-3909797 Share on other sites More sharing options...
DavidMil Posted December 12, 2017 Share Posted December 12, 2017 I got the print head installed and the printer is working again! From my installation I have a few suggestions: Make sure the wheel is VERY clean as well as under the wheel before you install the new print rubber. Make sure that the new rubber print head is seated all the way into the groves in the print wheel and aligned properly. Makes sure the four small metal 'fingers' on the front of the printhead are straight and that the don't touch any of the raised parts of the print rubber while spinning the wheel with the new print rubber installed (this is VERY important!). Finally, make sure the ink roller is seated all the way down and not loose. I found that just the slightest touch on the back of the ink roller caused excess ink all over the new rubber print head. Thanks again Irgendwer, DavidMil 2 Quote Link to comment https://forums.atariage.com/topic/271589-revive1027-order-thread/page/3/#findComment-3909984 Share on other sites More sharing options...
+wood_jl Posted December 12, 2017 Share Posted December 12, 2017 I've never had a 1027, but a friend did, and it was pretty cool at the time to have letter-quality. Just to be sure - so I can forget about ever thinking to add one to the collection - THIS PROJECT IS DONE FOREVER AND THERE WILL NEVER BE ANY MORE. That is correct, no? Good job on the project, however! It's great to see 1027 owners back in business again! Quote Link to comment https://forums.atariage.com/topic/271589-revive1027-order-thread/page/3/#findComment-3910030 Share on other sites More sharing options...
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.